NAME _____________________________________________________ CLASS __________ DATE __________
1.1
CREATION OF A ONE-VARIABLE DATA SET
Steps for creating a non-weighted one-variable data set
1.Turn the calculator on and press STAT to enter the statistics menu.
2.Touch A EDIT, press ENTER , to view the statistics data entry screen. If there is a data set present within the lists on your calculator, use the arrow keys to move to the list, if necessary, and press ▲ to highlight the list label.
3. Press DEL
ENTER to delete the old data. Repeat for other lists of data.
Copyright © 1998, Sharp Electronics Corporation. Permission is granted to photocopy for educational use only.
4.Move the highlighter to the cell directly below the L1 in the table. Enter the following data set:
5 | 8 | 7 |
| 6 | 8 | 9 | 3 | 5 |
|
| |||||
by pressing 5 | ENTER |
| 8 | ENTER | 7 | ENTER | 6 | ENTER | 8 | ENTER | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 | ENTER | 3 |
| ENTER | 5 |
| ENTER | . |
|
|
|
|
|
5.To check the data you have entered, press ▲ to move back through the data values.
6. To sort your data set in an ascending manner, press | + – |
| STAT | , touch |
⋅ ⎟ |
|
B OPE, double touch 1 sortA, press 2ndF L1 ) ENTER . Press STAT ,
touch A EDIT, press ENTER . Notice this first cell now contains the smallest value 3.
7. | To save this data set, press | + – |
|
| 2ndF |
| LIST | , touch C L_DATA, double | |||||
⋅ ⎟ |
|
|
| ||||||||||
|
|
|
|
|
|
|
|
| |||||
| touch 1 StoLD, press 1 | ENTER |
| . You can store up to ten sets of six lists. | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8. | To retrieve a data set matrix into a statistical data set, press | + – |
| 2ndF |
| ||||||||
⋅ ⎟ |
|
|
LIST , touch C L_DATA, double touch 2 RclLD, press 1 ENTER .
56Blackline Masters/STATISTICS USING THE SHARP