Section 6
Programming
2. Press F6 to change to repeater mode.
You will see the Get/Save Screen, Repeater Mode (Figure
Figure 6-2. Get/Save, Repeater Mode
Programming the Repeater
1.From the Get/Save Menu, Press F2 to read the repeater. You will see the screen in Figure
You have two options: to read the repeater, or to designate it as a generic. You may need to use the generic designation if the option board is not physically accessible (i.e. programming a replacement radio).
To read the repeater:
1.Connect the programming cable to the repeater.
2.Frees F2 to continue.
To designate the repeater as generic:
1. Press F10 to abort
Figure 6-3. Read Repeater Screen
March, 1993 | Section |