![](/images/new-backgrounds/1304209/30420951x1.webp)
Section 6
Programming
Reading the Transmitter Radio
After reading the repeater, you will see the screen in Figure
Figure 6-4. Read Transmitter Screen
You have two options: to read the transmitter, or to skip it.
To read the transmit radio:
1.Connect the programming cable to the transmitter.
2.Press F2 to continue.
To skip the transmitter:
1. Press F10 to abort.
If you choose to read the radio, and it has previously been programmed in radio mode, you will see the screen in Figure 6-5.
NOTE
Figure 6-5 is for your information only. It may indicate
that the wrong radio was read.
If custom settings have previously been programmed for the radio, you will see the screen in Figure
March, 1993 | Section |