Sharp TINSE4796FCZZ, MX-C402SC manual Loading paper in a tray

Page 23

CHANGING PAPER IN A TRAY

Loading paper in a tray

A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 to A4) can be loaded in trays 1 and 2.

A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2" to size 8-1/2" x 14" (B5 to A4) can be loaded in trays 3 and 4.

Gently pull out the paper tray. If paper remains in the tray, remove it.

Move the two guides on the tray. Load the paper so that it is not as shown below when viewed from the front and side of the machine.

The loaded paper should not go higher than these protrusions.

Insert the paper with the print side face up.

Fan the paper well before inserting it.

Indicator line

The indicator line indicates the maximum height of the paper that can be loaded in the tray. When loading paper, make sure that the stack is not higher than the indicator line.

For detailed information, see “TRAY SETTINGS FOR TRAY 1 TO 4” in “Chapter 1 - BEFORE USING THE MACHINE” in the Operation Guide.

21

Image 23

Contents Start Guide EMC this machine and peripheral devices FAX interface cable and Line cableContents Warranty Power notes Symbols in this manualDo not install in a location with moisture or dust Installation notesNear a wall About consumablesDo not use a flammable spray to clean the machine Handling precautionsBattery Disposal Laser information Safety PrecautionsOperation Guide Printed manuals Start GuideFacsimil CopyDocument filing Scanner Printer Opening the Web pages Accessing the WEB Server in the MachineTouch the Print key to Right of All Custom SettingChecking the IP Address Touch the List Print User keyPart Names and Functions Supplies Operation Panel Image send indicatorsNumeric keys Clear key Turning off the power Turning the Power on and OFFMain power switch Power key Turning on the powerSet the original in the lower tray Using the automatic document feederPlacing Originals Place the original face down Using the document glassNames of the trays Changing Paper in a TrayLoading paper in a tray Example Loading an envelope Loading paper in bypass trayCD-ROMS and Software Before Installing SoftwarePPD driver PCL6 printer driverPS printer driver Sharpdesk/Network Scanner Utilities CD-ROM For Windows Can only be used when the machine is connected to a networkWindows*1 Macintosh*4 Verifying System RequirementsFor users of Windows 2000/XP/Server 2003/Vista/Server 2008/7 For users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9Checking the IP address of the machine Connecting the Machine with a USB Cable WindowsOpening the Software Selection Screen for ALL Software Setup in a Windows EnvironmentSetup in a Windows Environment If the machine is connected to an IPv6-only network Installing the Printer Driver / PC-FAX DriverClick the Printer Driver button Standard installationSetup in a Windows Environment Setup in a Windows Environment Printer name window Window confirming installation of the display fontsIf you are using Windows Vista/Server 2008/7 If you are using Windows 2000/XP/ServerThis completes the installation Document glass Document backplate sheet Regular MaintenanceCleaning the document glass and automatic document feeder Supply of spare parts and consumables Storage of supplies Proper storageStoring toner cartridges Staple cartridgeMachine specifications / copier specifications SpecificationsContinuous copy Warm-up timeFirst-copy time Copy ratiosFirst-copy time Incorrect CorrectOutput tray Center tray Bypass trayDuplex module Continuous copying speeds Ambient environment Acoustic noise emission measurement according to ISO7779 Automatic document feeder specificationsOriginal sizes Specifications Factory default account To the Administrator of the MachineFactory default passwords Factory default passwords Web pagesAbout the Telephone Consumer Protection ACT For the users of the fax functionSharp Electronics Corporation FCC Notice to usersTo the Administrator of the Machine Canada Trademark acknowledgments Page Page MX-C402SC Start Guide Sharp Electronics Corporation