Sharp TINSE4796FCZZ, MX-C402SC manual Setup in a Windows Environment

SETUP IN A WINDOWS ENVIRONMENT

When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below.

•Machine connection method: LPR Direct Print (Auto Search)

•Set as default printer:Yes (excluding the PC-Fax driver)

•Printer driver name: Cannot be changed

•PCL printer display fonts: Installed

If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and click the [Next] button.

If you selected other than [LPR Direct Print (Auto Search)], see the following pages in the Operation Guide:

•LPR Direct Print (Specify Address): page 1-85

•IPP: page 1-88 • Shared printer: page 1-94

•Connected to this computer: page 1-90

3 Printers connected to the network are detected. Select the machine and click the [Next] button.

• If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button.

•You can also click the [Specify condition] button and search for the machine

by entering the machine's name (host name) or IP address. ☞Checking the IP address of the machine (page 28)

33