Sharp MX-3610N Saddle Finisher, Punch module for finisher, Punch module for saddle finisher

Page 9

SPECIFICATIONS

Saddle Finisher

Name

Finisher (MX-FN10)

 

 

Paper sizes

Depends on feeder specifications

Useable paper

Paper weight

55 g/m2 (15 lbs.) to 256 g/m2 (68 lbs.)

No. of trays

1

 

 

 

Non-stapled

A3 wide (12" × 18") / A3 (11" × 17") /

 

 

B4

(8-1/2" × 14") / A5R (5-1/2" × 8-1/2"R): 500 sheets

 

 

A4

(8-1/2" × 11") / A4R (8-1/2" × 11"R) / B5

 

 

B5R (7-1/4" × 10-1/2"R): 1,000 sheets

Tray capacity (80g/m2 (21 lbs.))

Staple function

A3

(11" × 17") / B4 (8-1/2" × 14"): 50 units or 500 sheets

 

 

A4

(8-1/2" × 11") / A4R (8-1/2" × 11"R) / B5 / B5R :

 

 

50 units or 1,000 sheets

 

Offset output is not available for A3 wide (12" × 18") /

 

A5R (5-1/2" × 8-1/2"R).

Required power supply

Supplied from this machine

Weight

Approx. 40 kg (88 lbs.)

 

When output paper tray is stored

 

497 mm (W) × 631 mm (D) × 988 mm (H)

Dimensions

(19-9/16" (W) × 24-27/32" (D) × 38-57/64" (H))

When output paper tray is extended

 

 

656 mm (W) × 631 mm (D) × 988 mm (H)

 

(25-53/64" (W) × 24-27/32" (D) × 38-57/64" (H))

Max. no. of stapled sheets

Max. no. of 50 sheets (A4 (8-1/2" × 11"), A4R (8-1/2" × 11"R), B5, B5R)

Max. no. of 25 sheets (A3 (11" × 17"), B4 (8-1/2" × 14"))

 

Staple position

1 bottom, 1 top, 2 middle

Staple method (for saddle stitch)

Centred fold with stapling in 2 centre places

Saddle stitch fold position

Centred fold

Saddle usable sizes

A3 (11" × 17") / B4 (8-1/2 × 14") / A4R (8-1/2" × 11"R)

Saddle usable paper weight

60 g/m2 (16 lbs.) to 209 g/m2 (56 lbs.)

Punch module (for finisher)

Name

Punch module for finisher

 

MX-PN11A, MX-PN11B, MX-PN11C, MX-PN11D

Paper size for punch module

A3 (11" × 17") to A4 (7-1/4" × 10-1/2"R)

 

MX-PN11A 2 holes

Holes

MX-PN11B 3 holes

MX-PN11C 4 holes

 

 

MX-PN11D 4 holes (wide)

Punch module (for saddle finisher)

Name

Punch module for saddle finisher

 

MX-PNX5A, MX-PNX5B, MX-PNX5C, MX-PNX5D

Paper size for punch module

A3 (11" × 17") to A4 (7-1/4" × 10-1/2"R)

 

MX-PNX5A 2 holes

Holes

MX-PNX5B 3 holes

MX-PNX5C 4 holes

 

 

MX-PNX5D 4 holes (wide)

20

Required power supply

Supplied from finisher

Dimensions

98 mm (W) × 477 mm (D) × 137 mm (H)

(3-55/64" (W) × 18-50/64" (D) × 5-26/64" (H))

 

Weight

Approx. 3 kg (7 lbs.)

Required power supply

Supplied from saddle finisher

Dimensions

122 mm (W) × 604 mm (D) × 248 mm (H)

(4-27/32" (W) × 24-5/32" (D) × 9-59/64" (H))

 

Weight

Approx. 3.5 kg (7.7 lbs.)

Installation notes

CAUTION

Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine.

Risk of injury due to the machine falling or toppling.

If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install the product on a flat, stable surface that can withstand the weight of the product.

Do not install in a location with moisture or dust.

Risk of fire and electrical shock.

If dust enters the machine, dirty output and machine failure may result.

Locations that are excessively hot, cold, humid, or dry (near heaters, humidifiers, air conditioners, etc.)

The paper will become damp and condensation may form inside the machine, causing misfeeds and dirty output. SPECIFICATIONS (page 18)

If the location has an ultrasonic humidifier, use pure water for humidifiers in the humidifier. If tap water is used, minerals and other impurities will be emitted, causing impurities to collect on the inside of the machine and create dirty output.

When the machine is installed, the adjusters (5) must be lowered to the floor to secure the machine (prevent it from moving).

Rotate the adjusters in the locking direction until they are in firm contact with the floor.

If you find it necessary to reposition the machine due to

Lock

Release

 

 

rearrangement of your office layout or other reason, retract the

 

 

adjusters from the floor, turn off the power, and then move the

 

 

machine.

 

 

(After moving the machine, lower the adjusters again to secure the machine.)

Locations exposed to direct sunlight

Plastic parts may become deformed and dirty output may result.

Locations with ammonia gas

Installing the machine next to a diazo copy machine may cause dirty output.

Do not install the machine in a location with poor air circulation.

A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide sufficient air circulation. (The odor may occasionally cause headaches.)

* Install the machine so that people are not directly exposed to exhaust from the machine. If installed near a window, ensure that the machine is not exposed to direct sunlight.

Near a wall

Be sure to allow the required space around the machine for

 

30 cm

 

 

servicing and proper ventilation. (The machine should be no

 

 

closer than the distances indicated below from walls. The

 

 

indicated distances are for the case when a saddle finisher and

30 cm

45 cm

large capacity paper tray are not installed.)

Locations subject to vibration.

Vibration may cause failure.

CAUTION

The machine includes a built-in hard drive. Do not subject the machine to shock or vibration. In particular, never move the machine while the power is on.

The machine should be installed near an accessible power outlet for easy connection.

Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker.

9

Image 9
Contents Quick Start Guide For the users of the fax function Important safety instructionsInformation on Disposal for Users private households Information on DisposalInformation on Disposal for Business Users „„ In the European UnionSettings mode password To the Administrator of the MachinePassword for logging in from a computer FAX interface cable and Line cableOthers „„ WarrantyEmission of noise and chemicals Noise emission valuesSupplies ContentsSpecifications Network Scanner SpecificationsDownloading the Operation Guide PC Power notes Fax SpecificationsNetwork Printer Specifications Saddle Finisher Installation notesPunch module for finisher Punch module for saddle finisherAbout consumables Handling precautionsAutomatic document feeder Standard equipment TrayLaser information Basic Specifications / Copier specifications„„ Caution Do not look directly at the light sourceMaintenance Names of Parts and COMPONENTS, Turning on the PowerReplacing a toner cartridge Removing misfeedsMail Home ScreenPlace the original in the automatic document feeder Overview of Copy OperationPlace the original on the document glass Print
Related manuals
Manual 12 pages 45.59 Kb

MX-3110N, MX-2610N, MX-3610N specifications

The Sharp MX-2610N, MX-3110N, and MX-3610N are part of Sharp's impressive lineup of multifunction printers that cater to the diverse needs of modern offices. These models blend versatility, efficiency, and advanced technologies to streamline document management and enhance workplace productivity.

Starting with the MX-2610N, this device is designed for small to medium-sized businesses that require reliable printing, copying, scanning, and faxing capabilities. It boasts a user-friendly 7-inch color touchscreen interface, making navigation intuitive for users of all skill levels. With a print speed of up to 26 pages per minute (ppm), the MX-2610N delivers crisp and vibrant output in both color and black-and-white. Its advanced scanning features enable quick two-sided scanning at a speed of up to 75 images per minute, ensuring that large documents can be digitized efficiently. Additionally, the device supports a variety of media sizes and types, making it suitable for printing brochures, presentations, and reports.

Next in the lineup, the MX-3110N offers a higher print speed of 31 ppm, catering to businesses with moderate to high print volumes. This model incorporates similar features to the MX-2610N but with enhanced productivity. It includes a powerful 1 GHz dual-core processor that supports faster data processing, resulting in reduced waiting times for print jobs. The MX-3110N also comes with robust security features, including secure print and user authentication, protecting sensitive documents from unauthorized access.

The MX-3610N, the flagship model among the trio, delivers exceptional performance with a print speed of up to 36 ppm. This printer is perfect for larger organizations that demand high-capacity output without sacrificing quality. The MX-3610N offers advanced finishing options, such as stapling, hole punching, and folding, making it ideal for creating professional-looking reports and presentations. Additionally, the device's connectivity options, including Wi-Fi, Ethernet, and mobile printing, ensure that users can print from their preferred devices seamlessly.

All three models feature Sharp's cloud connectivity options, allowing users to print directly from popular cloud services. Combined with energy-efficient technologies and a compact design, the MX-2610N, MX-3110N, and MX-3610N stand out as reliable workhorses capable of adapting to various office environments while significantly enhancing productivity and workflow efficiency.