INSTALLATION INSTRUCTIONS
Place SW Series Food Warmers in the most convenient location for ease of cleaning, maintenance, service and general operation. When installing this unit, avoid drafts, close proximity to grease,
A minimum of 1” clearance on top, both sides and bottom is required for proper air circulation. This clearance is assured by the 1” adjustable legs supplied with the unit.
WARNING
This unit must be used with the proper voltage as
Specified on the unit data plate located on rear
Panel. Use of any other voltage or altering plug
Will damage unit, void warranty
And may cause injury.
The circuit on which the receptacle is installed must be of adequate wiring size and sufficient to meet the requirements indicated on the unit data plate and in accordance with the National Electrical Code and local electrical installation codes. Failure to meet these requirements will void the warranty.
Before connecting this unit to a power source, remove all packing materials.
**Models shipped overseas are supplied with power cord only.
2
