Sharp AR-201 operation manual Single Pass Feeder AR-SP2, Using the SPF, Stream feeding mode

Page 60
Set the originals face up in the document feeder tray.
● The SPF indicator will light up. If this indicator does not light up, the originals are not properly set or the SPF is not properly closed.

SINGLE PASS FEEDER (AR-SP2)

Using the SPF

●Be sure to remove any staples or paper clips from the originals.

●Damaged or crumpled originals may misfeed in the SPF. It is recommended that these originals be copied from the original table.

●Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If not, original misfeeds may result.

●For best feeding of originals which have binding holes punched into them, insert them so that the holes are positioned to the right or along the side guides.

●Special originals such as transparency film and tracing paper should not be fed through the SPF but should be copied from the original table.

Single pass feeder (AR-SP2) OPTIONAL EQUIPMENT

Stream feeding mode

If the stream feeding mode has been enabled using user program No. 4, the SPF indicator will continue to blink for approximately 5 seconds after feeding of all originals is completed. While this indicator is blinking, any new originals placed in the SPF will be fed and copied automatically. See page 36, USER PROGRAMS.

1 Ensure that no original is left on the original table.

2 Adjust the original guides to the size of the originals.

3

●The ORIGINAL SIZE indicator for the detected original size will light up, and the paper tray with the corresponding paper size will be automatically selected.

●The auto paper select function can be disabled using user program No. 8. If this function has been disabled, use the TRAY SELECT ( ) key to select the desired paper tray. See page 36, USER PROGRAMS.

●To copy onto a different size paper, use the TRAY SELECT () key to make the selection.

●The bypass tray cannot be automatically selected.

Set the number of copies and press the START () key.

4 ● Press the CLEAR () key to stop copying in the middle of a run.

●If the offset stack mode is enabled using user program No. 19, each set of copies will be offset from the previous set in the sort and group modes.

58

Page 59 Page 61
Image 60
Page 59 Page 61
Contents AR-201 Follow the cautions below when using this copier Contents Introduction Conventions used in this manualAB series metric and inch series references Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p Zoom indicator p.17Paper Size indicators Alarm indicatorsAuto Image key and indicator Start key and indicatorPreset Ratio selector keys and indicators p Original Size Enter key and indicatorsCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key Enter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Normal CopyingClose the platen cover How to remove the platen cover Set the number of copies using the numeric keysNormal Copying Press the Start keyREDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image key Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualEnsure that the desired paper tray is selected Set the number of copies and press the Start keyBypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key Use the Preset Ratio selector , keys and zoom XY ZoomReverse Dual page Copy Press the Dual page Copy keySet the number of copies Press the Start key Interrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyToner Cartridge Replacement Push the toner cartridge lock release lever and pullToner Cartridge Replacement Toner cartridge lifePress the light key Misfeed Removal Misfeed in the bypass trayMisfeed in the copier First confirm the misfeed locationMisfeed Removal Push gently on both sides of the front cover to open CoverPush gently on both sides of the front cover to open Misfeed in the transport area Misfeed in the upper paper tray Close the side cover by pressing the handle on CoverMisfeed in the lower paper tray Remove the misfed paperClose the paper tray Close the lower side cover Maintenance Required Developer RequiredUser Programs List of user programsProgram No Program name Description Setting the user programs Enter a program number using the numeric keysUser Programs Program name Program NoSelect the desired parameter using the numeric keys Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Use the copy ratio display key to select the account number Press and hold down the 0 keyProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off modeUser Maintenance Original table and platen coverBypass tray paper feed roller User Maintenance Transfer charger cleaningCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeProblem Solution Copier TROUBLE?Copier TROUBLE? COPY/FAX keySelf-diagnostic function ExampleSupplies Types and sizes of copy paperSupplies Genuine supplies statementProper storage Store the supplies in a location that isSpecifications Specifications Memo Optional Equipment System Configuration Specifications Single Pass Feeder AR-SP2Part Names Using the SPF Stream feeding modeSingle Pass Feeder AR-SP2 Misfeed removal Electronic Sorting KIT AR-EB3 Rotation copyingSort mode Group modeElectronic Sorting KIT AR-EB3 Sort/groupCopying in the sort mode Set the originals face up in the document feeder tray1 or 4 Enter the desired pattern number using a numeric key Press the 2 in 1 / 4Selection Key to completePress the Erase / key to select the desired Erase mode EraseElectronic Sorting KIT AR-EB3 Margin shift Sheet Paper Feed Unit AR-DE5 Loading copy paperConfirm that the misfeed indicator has gone out AR-DE5 Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsMedical Conditions Generally Aggravated by Exposure None required under normal use Memo Memo Memo Class Laser Product Laser Klasse Page Sharp Corporation

AR-201 specifications

The Sharp AR-201 is a compact yet powerful multifunctional printer designed to meet the demands of small to medium-sized offices. This reliable device combines advanced printing, copying, and scanning capabilities, making it an ideal choice for businesses looking to enhance productivity without sacrificing space.

One of the standout features of the AR-201 is its impressive printing speed, which can reach up to 20 pages per minute for black and white documents. This efficiency allows businesses to quickly produce high-quality documents, reducing wait times and improving workflow. With a resolution of up to 600 x 600 dpi, the printer ensures that text and graphics are crisp and clear, making it suitable for both standard office documents and professional presentations.

The AR-201 also includes a convenient automatic document feeder (ADF) that can handle up to 50 sheets at a time. This feature significantly streamlines the copying and scanning processes, enabling users to process multiple pages in one go without the need for manual input. The copier function provides a range of options, including reduction and enlargement, ensuring flexibility in document handling.

In addition to its multifunction capabilities, the AR-201 is designed with user-friendliness in mind. Its intuitive control panel features a simple layout that allows users to navigate effortlessly through various functions. The machine also supports multiple paper sizes, including letter, legal, and A4, accommodating a variety of printing needs.

Connectivity is another key aspect of the Sharp AR-201. The device supports USB connectivity, making it easy to connect to computers and laptops. For businesses looking to enhance collaboration, the printer can be networked, allowing multiple users to access its features seamlessly.

The AR-201 is built with sustainability in mind. Sharp incorporates energy-saving technologies that minimize power consumption during operation and standby modes. This environmentally friendly design not only contributes to reduced operating costs but also aligns with corporate sustainability goals.

In summary, the Sharp AR-201 is a feature-rich multifunction printer that excels in speed, quality, and usability. With its multifunctionality, user-friendly design, and energy-efficient features, it serves as an excellent solution for businesses aiming to improve their printing capabilities while maintaining a focus on efficiency and environmental responsibility. Whether for everyday printing tasks or high-volume copying and scanning, the AR-201 stands out as a reliable choice in any office setting.
Top Page Image Contents