Sharp AR-201 Zero key, Tray Select key p, Auto Image key and indicator, Clear key, Clear ALL key

Page 9

PART NAMES AND FUNCTIONS

Inch system

In some countries and regions, 8-1/2" x 13" size is indicated on the operation panel.

GETTING STARTED Part names and functions

Zero key

Use as part of numeric keys to enter copy quantity. Press during a continuous copy run to display the number of copies completed in the current run.

Press during standby to display the total output count.

1st display

 

2nd display

 

 

 

 

 

 

 

 

 

 

 

 

Press and hold down the key.

12,345 sheets output

Note: A3 (11" x 17") size copies are counted as two

TRAY SELECT () key (p. 14)

Use to manually select a paper tray.

AUTO IMAGE () key and indicator

Press for automatic copy ratio selection.

Paper feed location/misfeed location indica- tors (p. 30)

The selected paper feed location is shown by a lit indicator ().

The general location of misfed paper is shown by a

blinking red indicator ().

copies.

CLEAR () key

Clears the copy quantity display or terminates a copy run.

START () key and indicator

Copying is possible when the indicator is on. Press to start copying.

CLEAR ALL () key

Clears all selected settings and returns the copier to the initial settings.

PRESET RATIO selector keys and indicators (p.

17)

Use to sequentially select preset reduction/enlargement copy ratios: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200% (50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%).

ORIGINAL SIZE ENTER () key and indicators

Use to input the original size.

AUTO PAPER SELECT () indicator

Paper of the proper size will be automatically selected depending on the original size and selected copy ratio when this indicator is on.

DUAL PAGE COPY () key and indicator

(p. 24)

Use to make individual copies of two originals placed side by side on the original table.

ERASE (/) key and indicators (p. 65)

Press to select the edge erase and/or the centre erase mode. (Only available when an optional electronic sorting kit is installed)

MARGIN SHIFT () key and indicator (p. 67)

Shifts text or image on the copy to leave a binding margin on the left side of the copy. (Only available when an optional electronic sorting kit is installed)

Initial settings

The copier assumes the initial settings when it is first turned on, when the CLEAR ALL () key is pressed, and ap- proximately one minute* after the last copy is made in any mode.

Copy ratio: 100%

Exposure: Automatic

Copy quantity: 0

All special copier modes: Off

Auto paper selection: On

Paper feed station: Previously selected paper tray

*This time (auto clear time) can be changed. See page 36,

USER PROGRAMS.

7

Image 9
Contents AR-201 Follow the cautions below when using this copier Contents Introduction Conventions used in this manualAB series metric and inch series references Main Features Part Names and Functions Part Names and Functions Zoom indicator p.17 Interrupt key and indicator pPaper Size indicators Alarm indicatorsStart key and indicator Auto Image key and indicatorPreset Ratio selector keys and indicators p Original Size Enter key and indicatorsDo not install your copier in areas that are Copier InstallationDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key Enter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Normal CopyingClose the platen cover Set the number of copies using the numeric keys How to remove the platen coverNormal Copying Press the Start keyAutomatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image key Enter the number of copies Press the Start keyManual REDUCTION/ENLARGEMENT/ZOOMEnsure that the desired paper tray is selected Set the number of copies and press the Start keyUnfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key XY Zoom Use the Preset Ratio selector , keys and zoomReverse Dual page Copy Press the Dual page Copy keySet the number of copies Press the Start key Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePush the toner cartridge lock release lever and pull Toner Cartridge ReplacementToner Cartridge Replacement Toner cartridge lifePress the light key Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier First confirm the misfeed locationMisfeed Removal Push gently on both sides of the front cover to open CoverPush gently on both sides of the front cover to open Misfeed in the transport area Close the side cover by pressing the handle on Cover Misfeed in the upper paper trayMisfeed in the lower paper tray Remove the misfed paperClose the paper tray Close the lower side cover Developer Required Maintenance RequiredUser Programs List of user programsProgram No Program name Description Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoSelect the desired parameter using the numeric keys Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Press and hold down the 0 key Use the copy ratio display key to select the account numberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeUser Maintenance Original table and platen coverBypass tray paper feed roller Transfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeCopier TROUBLE? Problem SolutionCOPY/FAX key Copier TROUBLE?Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isSpecifications Specifications Memo Optional Equipment System Configuration Specifications Single Pass Feeder AR-SP2Part Names Using the SPF Stream feeding modeSingle Pass Feeder AR-SP2 Misfeed removal Rotation copying Electronic Sorting KIT AR-EB3Group mode Sort modeElectronic Sorting KIT AR-EB3 Sort/groupSet the originals face up in the document feeder tray Copying in the sort mode1 or 4 Press the 2 in 1 / 4 Enter the desired pattern number using a numeric keySelection Key to completeErase Press the Erase / key to select the desired Erase modeElectronic Sorting KIT AR-EB3 Margin shift Loading copy paper Sheet Paper Feed Unit AR-DE5Confirm that the misfeed indicator has gone out AR-DE5 Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsMedical Conditions Generally Aggravated by Exposure None required under normal use Memo Memo Memo Class Laser Product Laser Klasse Page Sharp Corporation

AR-201 specifications

The Sharp AR-201 is a compact yet powerful multifunctional printer designed to meet the demands of small to medium-sized offices. This reliable device combines advanced printing, copying, and scanning capabilities, making it an ideal choice for businesses looking to enhance productivity without sacrificing space.

One of the standout features of the AR-201 is its impressive printing speed, which can reach up to 20 pages per minute for black and white documents. This efficiency allows businesses to quickly produce high-quality documents, reducing wait times and improving workflow. With a resolution of up to 600 x 600 dpi, the printer ensures that text and graphics are crisp and clear, making it suitable for both standard office documents and professional presentations.

The AR-201 also includes a convenient automatic document feeder (ADF) that can handle up to 50 sheets at a time. This feature significantly streamlines the copying and scanning processes, enabling users to process multiple pages in one go without the need for manual input. The copier function provides a range of options, including reduction and enlargement, ensuring flexibility in document handling.

In addition to its multifunction capabilities, the AR-201 is designed with user-friendliness in mind. Its intuitive control panel features a simple layout that allows users to navigate effortlessly through various functions. The machine also supports multiple paper sizes, including letter, legal, and A4, accommodating a variety of printing needs.

Connectivity is another key aspect of the Sharp AR-201. The device supports USB connectivity, making it easy to connect to computers and laptops. For businesses looking to enhance collaboration, the printer can be networked, allowing multiple users to access its features seamlessly.

The AR-201 is built with sustainability in mind. Sharp incorporates energy-saving technologies that minimize power consumption during operation and standby modes. This environmentally friendly design not only contributes to reduced operating costs but also aligns with corporate sustainability goals.

In summary, the Sharp AR-201 is a feature-rich multifunction printer that excels in speed, quality, and usability. With its multifunctionality, user-friendly design, and energy-efficient features, it serves as an excellent solution for businesses aiming to improve their printing capabilities while maintaining a focus on efficiency and environmental responsibility. Whether for everyday printing tasks or high-volume copying and scanning, the AR-201 stands out as a reliable choice in any office setting.