Sharp AR-C160 operation manual Misfeed Removal, Misfeed in the optional Radf

Page 96

MISFEED REMOVAL

When a misfeed occurs, the copier will stop.

The message “MISFEED HAS OCCURRED. CLEAR

INDICATED AREA. PRESS FOR RECOVERY INSTRUCTIONS.” will appear with a display of paper misfeed locations. Press the INFORMATION key for more detailed information as necessary.

If paper becomes accidentally torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum or the corona wires.

( P. 5-6)

	CHAPTER5	( P. 5-9)
	CHAPTER5
	COPIERTROUBLE?
	COPIERTROUBLE?	MISFEED HAS OCCURRED.
		MISFEED HAS OCCURRED.
	Misfeed	CLEAR INDICATED AREA.
		CLEAR INDICATED AREA.
	removal	PRESS FOR RECOVERY INSTRUCTIONS.

ACB

First confirm the misfeed locations.

For misfeeds in an optional staple sorter, see page 7-13. For misfeeds in an optional large capacity tray, see page 7-17.

For misfeeds in an optional finisher, see page 7-26.

(P. 5-2)

( P. 5-3)

( P. 5-5)

Misfeed in the optional RADF

When the optional RADF misfeeds an original sheet, the copier will stop and the misfeed message will appear.

An original misfeed may occur at one of three locations:

(A)in the RADF feed section, (B) in the exit roller, or (C) under the transport belt.

5-2

Image 96

Contents AR-C160 Easily accessible For Your RecordsColor Copying with Special Features Color Copy SamplesNeg./Pos. Reverse See Multi-page Enlargement See Adjustments for Color Copying Printed photo modeRGB Adjust See Sharpness See Color Balance See Brightness/intensity/contrast See Original Brightness + Intensity + Contrast +Contents Using this Manual IntroductionChapter Installation Requirements Battery Disposal Safety Precautions Power on and OFF Become possiblePower on and OFF Power save modesSleep mode Preheat modePress the Information key in the standby mode Information FunctionScreen for the information categories will appear Using the Touch Panel How to use the touch panelSelection of function Using the Touch Panel Function setting iconsCopy Mode and Print Mode Basic screen of the print mode will appearPrinting documents from the computer Check the operation panel to confirm that the on LineCopy Mode and Print Mode Using the operation panel in the print modeHow to select the paper type for the bypass tray To return to the printer basic screen, press the return keyGeneral operation steps for using the scanner Making Copies Auditing Accounts Copy Start key is pressedSided copies of 1-sided originals Close the document coverUse the 10-key pad to enter the desired number Copies Making Copies Copying fromCopying from the Document Glass Sided copies from 1-sided originalsPress the Color Copy Start key or Black When making color copies in the duplex mode or making B/W Copy the reminder of the originals in reverse orderCopy the originals in reverse order Using the Radf Stream feeding modeUsing the Radf Adjust the original guides to the size of the originalsSet the originals face up in the document feeder tray Number Originals key or Originals key on the touch panel, then proceed toIf the number of originals is not known, select Press the Color Copy Start Key or Black Copy Start keyAdjust the original guides to the size of the originals Sided copies from 2-sided originalsOriginal 2-sided Copies 1-sided REDUCTION/ENLARGEMENT/ZOOM Automatic selectionOptional document feeder tray Select the paper tray with the desired paper sizeREDUCTION/ENLARGEMENT/ZOOM Manual selection129% Special Papers manual feed Two-sided copying with bypass tray Exposure Adjustments AutomaticOriginal image type Exposure Adjustments If TEXT/PRTD. PHOTO, Text or TEXT/PHOTOPress the Exposure key on the touch panel Has been selected in , select Auto or ManualJOB Memory Storing a job programJOB Memory Deleting a stored job programRecalling a job program Interrupting a Copy RUN Special Functions XY Zoom Press the XY Zoom keyPress the Copy Ratio key on the touch panel Following screen will appearXY Zoom Press the Y keyCopy ratio in the vertical Y direction will be highlighted Margin Shift Press the Special Modes keySpecial Modes screen will appear Select the desired shift amounts using Margin ShiftPress the Margin Shift key on the touch panel Select the shift directionSetting screen for Erase will appear EraseEdge + center erase Press the Erase key on the touch panelSelect the desired erase mode Erase on the touch panel. The selected erase mode will beErase HighlightedDual page Copying Dual page Copying Information 4 Press the OK keyEnsure that the desired tray is selected Centering Bottom directionCentering Press the Centering key on the touch panelCentering key will be highlighted Panel Press the Transparency Inserts key on the touchTransparency Inserts key will be highlighted Transparency Film with Insert Sheets Infor 4 Press the OK keyLoad transparency film into the bypass tray Key or Black Copy Start keyCovers Press the 2-SIDED Copy key and select the desiredDuplex selection window Select cover placement CoversNot Press the upper OK keyColor Adjustments Color Adjustments menu will appearColor Adjustments Press the RGB Adjust key on the touch panelSelect a color to be adjusted Key to weaken the colorSetting screen for Sharpness will appear Press the Sharpness key on the touch panelPress the upper OK key.SPECIALFUNCTIONS Coloradjustments Setting screen for Suppress Background will appear Press the Suppress Background key on the touchSuppression level Use the and + keys to select the desired backgroundLevel Color Balance Press the Color Balance key on the touch panelColor balance settings Brightness /INTENSITY /CONTRAST Select the desired item to be adjusted Use the and + keys to adjust the level of the selected itemSelect BRIGHTNESS, Intensity or Contrast on the touch panel Image Editing Functions Press the Image Edit key on the touch panelImage Edit menu will appear Image Editing Functions Press the Single Color key on the touch panelSelect the desired color Selected color key will be highlightedPress the Image Edit key on the touch panel Press the NEG./POS. Reverse key on the touchMode, the black and white areas will be reversed Relation to the NEG./POS. ReverseReverse C D Press the Mirror Image key on the touch panel Mirror Image key will be highlightedPlace the original on the document glass Place 2 ½ x 4 and 2 ½ x 2 ½ originals as shown belowSetting screen for Photo Repeat will appear Select the desired repeat typeTo 100% when this function is selected 11 x 17 FULL-BLEEDOriginal will be copied onto 12 x 18 size copy paper Optional document feeder cannot be used with this functionPress the 11 x 17 FULL-BLEED key on the touch panel 11 x 17 FULL-BLEED key will be highlightedSetting screen for MULTI-PAGE Enlargement will appear Press the MULTI-PAGE Enlargement key on Touch panelSelect the desired enlargement size PanelCancel OK Original Size & Orientation Select the original sizeSetting screen for Image Edit selections will appear Either one or both can be setAdjust the original size on the Original Size tab Press the Extra Size key on the touch panelPress the upper OK key on the touch panel Press the Auto Image key on the touch panelRefer to page 2-11 for the Auto Image function Supplies Paper Types and sizes of copy paperLoading copy paper For best results, use only Sharp recommended paperPaper Loading paper in the paper traysPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paperChanging the copy paper size in the tray Adding Toner Open the front coverAdding Toner Left example shows the toner hopper of black tonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Used Toner Disposal Disengage and remove the container from the copierOpen the toner collecting container cover Push once on the door to unlatch and open itStorage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? When a misfeed occurs, the copier will stop Misfeed RemovalMisfeed in the optional Radf Misfeed Removal Misfeed in the bypass trayOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original outTurn the transport lever to the left Do not pull out the paper transport in this stepMisfeed in the paper trays Close the front coverOpen the right side covers If the paper cannot be seen from the side, pull outMisfeed in the transport area, exit area and fusing area Open the front cover Turn the transport lever to the leftCheck to see if any paper is misfed in the exit area Close the paper tray and the side coversGently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Push the duplex module back into the copier Slide the paper guide if neededMaintenance Required When the message Ready to COPY. Maintenance RequiredToner Collecting Container of Transfer Unit Troubleshooting Troubleshooting Self-diagnostic functionExample General Information Part Names and Functions Part Names and Functions Interrupt key and indicator p Color Copy Start key and indicatorBlack Copy Start key and indicator LCD touch panelCustom Settings key Initial settingsInformation key p Sided Copy keyUser Maintenance Document glass and document coverContrast of the touch panel can be adjusted as below ContrastSpecifications CopierSpecifications Reversing Automatic Document Feeder optionalDuplex Module optional Printing mode Standby mode Acoustic Noise Emission measurement according to ISO7779Emission Concentration measurement according to RAL UZ62 Optional Equipment System Configuration BIN Staple Sorter AR-SS2 Part NamesUsing the staple sorter BIN Staple Sorter AR-SS2Sorter Capacity Using the document glass Staple sortUsing the optional Radf Up to 20 sets can be madeManual stapling Set of copies will be stapledStaple cartridge replacement Remove the empty staple cartridge from inside Staple boxRemove the rear paper and tape from the cartridge Staple jam removal Return the lever to its original positionBIN Staple Sorter AR-SS2 Copier will stop when a misfeed occurs Misfeed removalSlide the sorter back toward the copier and latch it into Specifications Paper Weight 13 ~ 28 lbs17 ~ 28 lbs 2 x 11 x 12 xPaper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2NWhen the button lamp goes out, pull the paper tray out Large Capacity Tray AR-LC2NFan the copy paper Load the paper onto the feed tableCapacity tray Remove any misfed paper from the copier and the largeRemove the misfed paper Gently push the tray back into place Finisher AR-FN4 Offset mode NON Offset modeFinisher AR-FN4 Offset stackStaple print Printed output will be stapledWhen the staple cartridge is empty, the message Slide Replace the staple as followsFinisherAR-FN4 Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation

Related manuals

Manual 38 pages 36.08 Kb