Sharp AR-203E X operation manual Place the original you wish to scan on the document, Glass/SPF

Page 20


3		Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 1)

If you are using Windows XP/Vista, you can use the WIA driver to scan from Paint and other WIA-compliant applications. The procedure for scanning using Paint is explained in the following.

1	Place the original you wish to scan on the document
	glass/SPF.

Reference:For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual.

2	After starting Paint, click the "File" menu and select
	"From Scanner or Camera".

The scan screen of the WIA driver will appear.

If you have WIA drivers for other devices installed in your computer, the "Select Device" screen will

open. Select "SHARP AR-xxxx" and click the Note "OK" button.

SHARP

AR-xxxx

18

Image 20

Contents AR-203E Contents Flow chart shown below provides printing overview Printing OverviewCurrent printer. If you intend to change any print Basic PrintingMake sure that Sharp AR-xxxx is selected as Windows 2000/XP/Vista Windows 98/MePrinter Driver Settings Printing a Watermark Print sampleClick the Paper tab in the printer driver setup Fitting the Printed Image to the PaperScreen Check the Fit To Page boxPrinting Multiple Pages on One Outline of the Print Status Window Sharing the Printer Using Windows Shared Printer Settings Client Settings part Click the start button, and click ControlPanel Click Add a printer in Printer TasksNext button Select settings in the Default Printer screenSelect Browse for a printer, and click When scanning from Scanner Using the unit to begin scanning Scanning OverviewPlace the original s you wish to scan on Document glass/SPFAfter starting TWAIN-compliant application, click File menu and select Select ScannerOpen the scanner driver setup screen Scanning Source menu, select the positionWhich you placed the original in Platen Document glass or SPFSet-up screen Preview screen Auto Scan Area Judgement buttonPreview window Rotate buttonPlace the original you wish to scan on the document Glass/SPFAfter starting Paint, click the File menu and select From Scanner or CameraClick the Scan button Select the paper source and picture type, and clickPreview button Click the start button, click Control Panel, click Printers and Other Hardware, and then clickScanners and Cameras Click the Sharp AR-xxxx icon and then click GetOriginal is sent to the original exit area, so you Click the Finish button Scan Setup area Show Twain setting screen when scanningOutline of Button Manager Application Selection areaButton Manager Settings What type of trouble do you have? Identifying Unit ProblemsPrinting trouble USB cable CHECK2 Is the interface cable connected securely?If the USB cable becomes disconnected CHECK2 Is your hard disk fragmented? Check Your ComputerCHECK1 Is there enough computer memory or hard disk space? When you make sure that the USB port is enabled Install the software, referring to InstallingPlug and Play Screen does not Appear Click the icon beside the Universal Serial BusFailed to Install the Driver Windows 2000/XP Faint, Uneven or Smeared Print Output CHECK2 Is the orientation of document setting correct? CHECK3 Is the paper loaded correctly?CHECK1 Has a paper jam occurred? CHECK2 Is the on Line indicator off?Nothing Prints Poor Scanning Result CHECK1 Is the original clean?CHECK2 Have you specified a suitable resolution? Scanned Image is Incorrectly Positioned SPF?CHECK4 Is there enough computer memory? Unable to Scan the ImageCHECK1 Is your application compliant to TWAIN? Printer Driver Features part User SettingsMain PaperImage Adjustment Index Page Page Page AR-203E