Audio PRE-OUTS / Subwoofer OUT, Monitor OUT

6. AUDIO PRE-OUTS / SUBWOOFER OUT

AUDIO PRE-OUTS - The NAD T741 receiver has five power amplifiers built-in to power all the speakers connected to it (Left, Right, Center, Left Surround, Right Surround). It is also possible to use the T741 as a pre- amplifier to drive external power amplifiers. This way, you use all the control functions the T741 provides, such as input select, surround mode, volume, tone controls, etc., but the external power amplifier actually powers the speaker connected to it instead of the T741’s integrated power amplifier for that channel.

Connect the RCA-to-RCA leads from the Front left and Right, Center, and/or Surround Left and Right Audio pre-out connectors to the external amplifiers. Connect speakers to the external amplifiers.

NOTES

•Never connect the T741’s speaker outputs and the speaker outputs of an external amplifier to the same speakers. When headphones are inserted the signals from all audio pre-out outputs will be muted.

•Before making any connections, check that the T741 and the power amplifiers it will be connected to are switched off. With volume turned down to a low level, switch power on only after all connections have been made.

SUBWOOFER OUT - Unlike for the full range five channels as described above, there is no power amplifier built-in for an additional subwoofer. The Subwoofer pre-out allows for connection to a sub-bass speaker system with its own external or integrated power amplifier (“active” subwoofers).

7. MONITOR OUT

Composite Video and S-Video outputs for connecting a TV or Video Monitor to view video sources connected to VIDEO 1 to VIDEO 5. Using a Video RCA-to-RCA lead, connect the “Video Line In” on the TV or monitor to the MONITOR OUT.

Note that an S-Video signal will also be available as a Video Composite signal on Monitor out, if the corresponding source is selected. The composite video input signals (No. 4; yellow sockets) will also be available as S-Video signal on the Monitor Out socket. If you use both S-Video and Video composite sources, you will only need to connect the S-Video Monitor Out to the television or projector.

8.SPEAKERS: FRONT, CENTER & SURROUND SPEAKERS FRONT SPEAKERS - Connect the right speaker to the terminals marked ‘FR’ ensuring that the red terminal is connected to the ‘+’ terminal on your loudspeaker and the black terminal is connected to the loudspeaker’s ‘-’ terminal. Connect the terminals marked “FL” to the left speaker in the same way.

Always use heavy duty (16 gauge; 1.5mm or thicker) stranded wire to connect loudspeakers to your T741. Unscrew the speaker terminal’s plastic bushing. Insert the bare cable end into the hole of the terminal and then secure the cable by tightening down the terminal’s bushing (Fig. 6).

To avoid any danger of bare metal from the speaker cables touching the back panel or another connector, ensure that there is only 1/2” (1.27cm) of bare cable and no loose strands of speaker wire.

NOTE

This unit is designed to produce optimum sound quality when speakers with impedance within the set’s ranges are connected. Please check the following information and choose speakers with the correct impedance for the connections.

FRONT SPEAKERS A: 8 ohms min. per speaker;

CENTER SPEAKER B: 8 ohms min.

SURROUND SPEAKERS: 8 ohms min. per speaker

CENTER SPEAKER - The terminal marked ‘C’ connects to the center loudspeaker that is used when the T741 is operated in Dolby* Digital, DTS, Dolby Pro Logic, EARS surround sound mode or with the 5.1 Ch. input selected.

Connect the center speaker in the same way as described with front speakers above.

SURROUND SPEAKERS - This connects the Surround loudspeakers that are used when the T741 is operated in Dolby Digital, DTS, Dolby Pro Logic, EARS Surround sound modes or with the 5.1 Ch. input selected.

Connect the surround speakers in the same way as described with FRONT SPEAKERS above; connect the left surround speaker to the set of terminals marked ‘SL’ and the right surround speaker to the terminals marked ‘SR’.

NOTE

The Center and/or Surround speakers must be selected as Large or Small in the Set-up menu “SPK SET” when speakers are connected to these outputs.

9. SOFT CLIPPING

When any amplifier is driven beyond it’s power output capabilities, a hard, distorted sound can be heard on very loud sounds. This is caused by the amplifier cutting off or ‘hard clipping’ the peaks of sound that it was not designed to reproduce. The NAD Soft Clipping circuit gently

limits the output of the system to minimize audible distortion if theGB amplifier is overdriven.

If your listening involves moderate power levels you may leave the Soft Clipping switch off. If you are likely to play at high levels that exceed the amplifier’s power capability, then switch Soft Clipping on.

T741 specifications

The NAD T741 is a versatile and robust home theater receiver designed to deliver exceptional audio and video performance. As part of NAD’s reputation for marrying quality with affordability, the T741 combines classic NAD performance with modern features to cater to both casual listeners and audiophiles alike.

One of the standout features of the T741 is its power output. The receiver is capable of delivering a solid 50 watts per channel into eight ohms, ensuring that it can drive a variety of speaker configurations without strain. This power output is complemented by NAD's renowned Dynamic Power, which allows the receiver to output higher wattage on demand for shorter bursts, ensuring that musical peaks and action sequences in movies are rendered with intensity and clarity.

Equipped with a broad array of input options, the T741 supports multiple audio sources, including analog and digital inputs, which enhance connectivity with various devices such as CD players, game consoles, and streaming devices. The integration of a built-in AM/FM tuner provides added versatility, allowing users to enjoy their favorite radio stations effortlessly.

The T741 also employs innovative technologies such as NAD's proprietary PowerDrive technology, which dynamically adjusts the receiver's power output according to the demand of the audio source being played. This ensures that listeners experience the full spectrum of sound, from subtle nuances to booming sound effects.

Another notable characteristic of the T741 is its compatibility with Dolby Pro Logic II decoding, which creates an immersive surround sound experience from standard stereo content. This feature is particularly beneficial for those who enjoy watching movies, as it enhances the auditory experience, making it more engaging and lifelike.

In terms of build quality, the T741 showcases NAD’s commitment to durability and design. The receiver features a solid chassis that minimizes vibrations, ensuring clean audio performance. The intuitive front panel layout allows for easy navigation and adjustments, making it user-friendly for individuals of all experience levels.

Overall, the NAD T741 embodies a well-rounded blend of performance, features, and value, making it an excellent choice for anyone seeking to enhance their home audio experience. By integrating advanced technologies and a focus on sound quality, the T741 stands out as a reliable and capable receiver, suitable for a modern home theater setup.