Sharp LL-T2000A operation manual Turning the power on, Changing between input terminals Input 1 ↔

Page 12

Connecting the monitor and turning the monitor on and off

Notes:

-Before connecting, ensure that the shape of the USB cable connector is correct.

-For information regarding the USB function (such as set-up) please refer to the operation manual of the computer to be connected.

-Some computers, OS and other devices may not be able to be activated. To ascertain a certain device's USB compatibility, please contact the manufacturer of the device.

1. Remove the cover.

 

 

 

 

 

 

 

 

Cover

(Rear View)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.Plug one end of the USB cable (provided) into the monitor's USB upstream port.

USB port: Upstream

(1 port)

3.Connect the other end of the USB cable into the computer or the USB downstream port.

4.Plug the USB device into the monitor’s USB downstream port.

Turning the power on

1.Turn on the computer.

2.Press the monitor's power button. The power LED will be lit green, and the screen will display an image.

Press power button

Power LED

Green light:

In use

Orange light:

Power saving mode or signal

 

failure

Lamp off:

Power OFF

Notes:

-Depending on the computer or OS, it may be necessary to use the computer to install monitor set-up information. If so, follow the steps below to install the monitor set-up information. (p. 13)

-When setting up the monitor or a connected computer for the first time, connecting an additional computer or after having changed an aspect of the current system, perform an automatic screen adjustment before use (p. 17).

Changing between input terminals

(INPUT 1 2)

When connected to two computers, use the INPUT button to switch between input signal terminals (i.e. to choose which computer's screen you want dis- played.)

USB port: Downstream (2 ports)

5. Replace the cover.

INPUT button

Pushing this button switches between input signal terminals, so that the screen changes to display any of the machines connected.

12

Image 12
Contents LL-T2000A LCD MonitorPage Table of Contents FCC Statement Declaration of ConformityVorsicht VarningPrecaucion Service Inquiries For Customers in U.KBlue BrownTips and safety precautions Power CordMonitor and accessory checklist LocationProduct description Front view Control PanelAdjusting the angle of the monitor Front viewConnecting the monitor and turning Monitor on and off Fitting the AC adapter inside the standConnecting the monitor to a computer PC etc Connecting to a second computerConnecting a USB device Downstream 2 portsTurning the power on Changing between input terminals Input 1 ↔For Windows For Windows98For Windows2000 Installing the ICC profile For WindowsMeTurning the power off Installing ColorSync profile for MacOsAdjusting the screen display Useful functions and tips Resetting Menu 1 AdjustmentResetting all adjustment values Adjustment lock functionAutomatic screen adjustment Adjusting the backlightAutomatic adjustment screen display Adjusting the screen automaticallyManual screen adjustment Menu 1 AdjustmentPhase ClockMenu 2 Gain Control Bright brightnessMenu 3 White Balance UserMenu 4 Mode Select Color ModeTroubleshooting Monitor care and repairMonitor care StorageSpecifications Product specificationsSignal timings Connector pinPower management Standards and compatibilityHow to attach the arm or stand Instructions for attaching a Vesa compliant armMemo Memo Sharp Corporation