Turning Power On/Off
Caution
•Turn on the monitor first before turning on the PC or playback device.
Turning on the main power
Main power switch
Caution
•The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on.
•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds.
•For a complete electrical disconnection, pull out the main plug.
Turning power on/off
Press the POWER button or POWER switch to turn the power ON/OFF.
nDate/time setting
•If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time.
DATE/TIME SETTING
/ | / |
|
| : |
| : | ||||
|
|
|
|
|
|
|
|
|
|
|
01 | / | 01 | / 20 | 13 |
| 12 | : | 00 |
| AM |
OK···[ENTER] CANCEL···[RETURN]
1.Press 
or 
to select the date and time, and
press 
or 
to change the numerical values.
2.Press ENTER .
•Be sure to set the date and time.
•The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the SETUP menu when the date/time setting screen disappears.
TIPS
•Set the date in “Month/Day/Year” order.
•Set the time on a
•The clock is maintained by the internal battery.
•If you already set the time but the date/time setting screen appears when the power is turned on, the internal battery may be exhausted. Please contact an authorized SHARP servicing dealer or service center for assistance with battery replacement.
•Estimated service life of the internal battery: About 5 years (depending on monitor operation)
•The initial battery was inserted at the factory when the monitor was shipped, so it may run out of power before its expected operation life.
ENGLISH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Power switch Power LED | ||||||||||||
|
|
|
|
|
|
|
| ||||||
Status | Status of the monitor | ||||||||||||
Green lit | Power on | ||||||||||||
|
|
|
|
|
|
|
| ||||||
Orange lit | Power off (Standby mode) | ||||||||||||
|
|
|
|
|
|
|
| ||||||
Green flashing | Input signal waiting mode | ||||||||||||
Accessing the operation panel
7 E