TANDBERG D13202 manual Tandberg GW, Hardware And Cabling

Page 4

TANDBERG GW

Dataport Command Interface User Guide

2.Connecting to the Dataport Command Interface through the RS-232 port.

The RS-232 port is a 9-pin, female, D-sub connector located on the back of the GW. The port is configured as a DCE (Data Communications Equipment). The RS-232 port is default set to 9600 baud, 8 databits, none parity and 1 stopbit from factory. The RS-232 port is also referred to as the Dataport.

2.1.Hardware And Cabling

The pin outs for the RS-232 are defined in the following table (the DTE, Data Terminal Equipment, could be a PC or other device capable of serial communication).

Pin no

Signal

Description

Direction

1

CD

Carrier detect

To DTE

2

RD

Receive data

To DTE

3

TD

Transmit data

From DTE

4

DTR

Data terminal ready

From DTE

5

 

Ground

 

6

DSR

Data set ready

To DTE

7

RTS

Ready to send

From DTE

8

CTS

Clear to send

To DTE

9

RI

Ring indicator

To DTE

NOTE! A straight through cable should be used between the TANDBERG GW’s RS-232 port and the DTE.

The figure below illustrates the recommended cable-wiring scheme for connecting the GW to a PC through RS-232.

TANDBERG GW

PC

 

 

DCE, 9 pin

DTE, 9 pin

 

1

CD

1

CD

2

RD

2

RD

3

TD

3

TD

4

DTR

4

DTR

5

GND

5

GND

6

DSR

6

DSR

7

RTS

7

RTS

8

CTS

8

CTS

9

RI

9

RI

 

 

 

 

DTR and RTS are ignored. DSR, CD, and CTS are always asserted, while RI is not used.

D13202 Rev 01

4

Image 4
Contents Tandberg GW Table of Contents Introduction Tandberg GW Hardware And CablingConfiguring The Dataport From The Web Interface TroubleshootingConnecting to the Datport Command Interface using Telnet Command types Command formatIntroduction Commands Calltransfer 1System Configuration Commands Ippassword Ippassword LAN interface passwordIpassignment Ipassignment LAN interface dhcp/staticIpqos mode precedence/diffserv/off Ipqos tos delay/throughput/reliable/cost/offIpqos Ipqos prectlph chantype tlph precvalueIsdnprot Isdnprot nsftel numberIsdnprot nsfvid number Isdnprot sendcomplete on/offNetwork auto/h320/h323 PardialPardial on/off PricablePricrc4 Pricrc4 PRI interface on/offPrinet Prinet protocolServices Services ftp on/offServices telnet on/off Services telnetchallenge on/off 23/57Sendnum Sendnum on/offSnmp Host ip address ip addressSystemname Systemname nameGeneral GW Commands Gwdid mode on/off Gwextdialin id mode off/ivr/ivrtcs4Disc gwid GwdidGwloadlimit Gwsettings Gwsettings natvid on/off Gwsettings customformats on/offGwhotline GwloadlimitGwsettings duovideo on/off or Gwsettings encryption on/off System Status Commands Chanstat a 28 connect 123456789 255255 334Sec Encstatus 11 des des 9FE389C8F664F3F5H323gkstatus H323gkstatus ipaddress ip port statusStatus registered/unregistered/regfailed IpcallchanstatusIpcallstatistics IpstatIpstat LAN interface PristatusPristatus b active 30 24 Temp SystemloadTemp degrees Celsius degrees Fahrenheit Debug Commands Tandberg GW Special Commands Feedback offCommand Parameter StorageIndex Commands

D13202 specifications

The TANDBERG D13202 is a state-of-the-art video conferencing system designed to facilitate seamless communication across vast distances. This innovative device stands out in the realm of video collaboration technologies, providing a user-friendly interface and an array of advanced features suited for businesses and organizations of all sizes.

One of the key features of the TANDBERG D13202 is its high-definition video quality, delivering crisp and clear images that ensure all participants feel as though they are in the same room. With support for high-definition resolutions up to 1080p, the D13202 offers an unparalleled visual experience. This capability is essential for presentations and meetings where detailed visuals can make a significant impact.

In addition to its video capabilities, the D13202 is equipped with superior audio technology. It includes advanced noise reduction and echo cancellation features, which improve sound clarity during conversations. This ensures that all voices are heard clearly, effectively eliminating the distractions often associated with poor audio quality in virtual meetings.

The system is designed with interoperability in mind, making it compatible with various video conferencing standards and protocols. This feature is essential for organizations that need to collaborate with clients or partners using different systems, providing a versatile solution for diverse communication needs. The ability to connect with other video conferencing platforms enhances the D13202’s utility, making it an invaluable asset for any organization looking to streamline their communication processes.

Another impressive aspect of the TANDBERG D13202 is its ease of deployment and use. The system comes with an intuitive interface that requires minimal training for users to get started. This simplicity empowers teams to schedule and conduct meetings effortlessly, minimizing the impact of technical difficulties on productivity.

The flexibility of the D13202 also extends to its integration capabilities. It can easily connect with existing IT infrastructure, allowing organizations to leverage their current setups while enhancing their video conferencing capabilities. Moreover, the device supports a range of collaboration tools, enabling file sharing and screen sharing during meetings, which further enriches the user experience.

In conclusion, the TANDBERG D13202 offers a comprehensive video conferencing solution that excels in quality, interoperability, and usability. Its advanced features and technologies make it an essential tool for modern communication, facilitating effective collaboration and connection among teams, no matter where they are located. As organizations increasingly embrace remote work and global collaboration, systems like the D13202 are poised to play a crucial role in shaping the future of workplace communication.