TANDBERG D13202 manual System Configuration Commands

Page 9

TANDBERG GWDataport Command Interface User Guide

4.2.1. System Configuration Commands

Command:

Description:

defvalues set

This command is used to restore factory default settings. Issuing this command with

 

no parameters will restore all settings except network settings and option key.

 

To reset all values to factory defaults the optional parameter all or *factory should

 

be added. Please download the parameter file, or write down the optionkey before

 

you execute this command (issue the command optionkey to view the current value

 

of the optionkey).

 

defvalues set [all/factory]

 

* Adding the optional parameter factory, the eeprom will be erased and the flash

 

disk will be formated.

 

 

h323gatekeeper

Sets gatekeeper parameters.

 

NOTE! H.323 services must be set before the GW can be registered to a gatekeeper,

 

ref. command gwh323service.

 

h323gatekeeper <on/off>

 

or

 

 

h323gatekeeper address <ipaddress>

 

---

 

 

sub-commands:

 

address: Sets the IP address of the gatekeeper

 

Example of h323gatekeeper feedback:

 

*P h323gatekeeper on

 

*P h323gatekeeper address 10.0.0.30

 

 

ipaddress

Configures the LAN interfaces when static IP address allocation is used (the

 

command ipassignment is used to select between DHCP and static IP address

 

allocation).

 

NOTE! The GW needs to reboot before the changes will apply.

 

ipaddress [LAN interface] static <ipaddress>

 

or

 

 

ipaddress [LAN interface] subnetmask <ipaddress>

 

or

 

 

ipaddress [LAN interface] gateway <ipaddress>

 

---

 

parameters:

LAN interface: 1. Number identifying the LAN interface. If this parameter is omitted the command applies to all interfaces (only interface 1 is in use).

sub-commands:

static: Sets the static IP address for the given LAN interface.

subnetmask: Sets the subnet mask variable for the given LAN interface. Subnet mask defines the network class. If the setting is 255.255.255.0 the local network will support up to 256 nodes, denoting a class C network. If the setting is 255.255.0.0 the local network is a class B network with 65536 addressable nodes.

gateway: Sets the gateway IP address for the given LAN interface. If a gateway is located on the LAN and the GW needs to reach nodes through this gateway, the gateway address can be set using the gateway variable (the IP address of the gateway will be set automatically if the GW is in DHCP mode)

D13202 Rev 01

9

Image 9
Contents Tandberg GW Table of Contents Introduction Hardware And Cabling Tandberg GWTroubleshooting Configuring The Dataport From The Web InterfaceConnecting to the Datport Command Interface using Telnet Command format Command typesIntroduction Calltransfer 1 CommandsSystem Configuration Commands Ippassword LAN interface password IppasswordIpassignment Ipassignment LAN interface dhcp/staticIpqos tos delay/throughput/reliable/cost/off Ipqos mode precedence/diffserv/offIpqos Ipqos prectlph chantype tlph precvalueIsdnprot nsftel number IsdnprotIsdnprot nsfvid number Isdnprot sendcomplete on/offPardial Network auto/h320/h323Pardial on/off PricablePricrc4 PRI interface on/off Pricrc4Prinet Prinet protocolServices ftp on/off ServicesServices telnet on/off Services telnetchallenge on/off 23/57Sendnum on/off SendnumSnmp Host ip address ip addressSystemname name SystemnameGeneral GW Commands Gwextdialin id mode off/ivr/ivrtcs4 Gwdid mode on/offDisc gwid GwdidGwsettings natvid on/off Gwsettings customformats on/off Gwloadlimit GwsettingsGwhotline GwloadlimitGwsettings duovideo on/off or Gwsettings encryption on/off System Status Commands Encstatus 11 des des 9FE389C8F664F3F5 Chanstat a 28 connect 123456789 255255 334SecH323gkstatus ipaddress ip port status H323gkstatusStatus registered/unregistered/regfailed IpcallchanstatusIpstat IpcallstatisticsIpstat LAN interface PristatusPristatus b active 30 24 Systemload TempTemp degrees Celsius degrees Fahrenheit Debug Commands Tandberg GW Feedback off Special CommandsParameter Storage CommandIndex Commands

D13202 specifications

The TANDBERG D13202 is a state-of-the-art video conferencing system designed to facilitate seamless communication across vast distances. This innovative device stands out in the realm of video collaboration technologies, providing a user-friendly interface and an array of advanced features suited for businesses and organizations of all sizes.

One of the key features of the TANDBERG D13202 is its high-definition video quality, delivering crisp and clear images that ensure all participants feel as though they are in the same room. With support for high-definition resolutions up to 1080p, the D13202 offers an unparalleled visual experience. This capability is essential for presentations and meetings where detailed visuals can make a significant impact.

In addition to its video capabilities, the D13202 is equipped with superior audio technology. It includes advanced noise reduction and echo cancellation features, which improve sound clarity during conversations. This ensures that all voices are heard clearly, effectively eliminating the distractions often associated with poor audio quality in virtual meetings.

The system is designed with interoperability in mind, making it compatible with various video conferencing standards and protocols. This feature is essential for organizations that need to collaborate with clients or partners using different systems, providing a versatile solution for diverse communication needs. The ability to connect with other video conferencing platforms enhances the D13202’s utility, making it an invaluable asset for any organization looking to streamline their communication processes.

Another impressive aspect of the TANDBERG D13202 is its ease of deployment and use. The system comes with an intuitive interface that requires minimal training for users to get started. This simplicity empowers teams to schedule and conduct meetings effortlessly, minimizing the impact of technical difficulties on productivity.

The flexibility of the D13202 also extends to its integration capabilities. It can easily connect with existing IT infrastructure, allowing organizations to leverage their current setups while enhancing their video conferencing capabilities. Moreover, the device supports a range of collaboration tools, enabling file sharing and screen sharing during meetings, which further enriches the user experience.

In conclusion, the TANDBERG D13202 offers a comprehensive video conferencing solution that excels in quality, interoperability, and usability. Its advanced features and technologies make it an essential tool for modern communication, facilitating effective collaboration and connection among teams, no matter where they are located. As organizations increasingly embrace remote work and global collaboration, systems like the D13202 are poised to play a crucial role in shaping the future of workplace communication.