
Wireless-G VPN Broadband Router
Configuring the Key Management Settings
Figure E-7: Diagram of VPN Tunnel between VPN Routers
Configuring VPN Router 1
Following these instructions for VPN Router 1.
1.On the VPN screen, select 3DES from the Encryption
2.Select SHA1 from the Authentication
3.Keep the default Key Exchange Method, Auto(IKE).
4.For the PFS setting, select Enabled.
5.Select
6.If you need more detailed settings, click the Advanced VPN Tunnel Setup button. Otherwise, click the Save Settings button and proceed to the next section, “Configuring VPN Router 2.”
7.On the Advanced VPN Tunnel Setup screen, keep the default Operation Mode, Main.
8.For Phase 1, select DES from the Encryption
9.Select MD5 from the Authentication
Appendix E: Configuring VPN Tunnels
Figure E-8: Security - VPN Screen (Key Management)
113
Configuring the Key Management Settings