Wireless-G VPN Broadband Router

smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission.

Fragmentation Threshold. In most cases, this value should remain at its default value of 2346. It specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended.

When you have finished making changes to the screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. For help information, click More.

Chapter 6: Configuring the Wireless-G VPN Broadband Router

fragmentation: Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet

29

The Wireless Tab - Advanced Wireless Settings

Page 39
Image 39
Mitel WRV54G manual Wireless-G VPN Broadband Router