![](/images/new-backgrounds/1220483/22048323x1.webp)
Chapter 1
To restore network defaults
1.Press the Wireless button on the product.
2.Press the button next to the down arrow on the display until Restore Network Defaults is highlighted, and then press OK.
3.Confirm that you want to restore the network defaults.
Network setup
Turn the wireless radio on and off
The wireless radio is off by default, but when you install the software and connect the HP
To turn the wireless radio on and off
1.Press the Wireless button on the product.
2.Press the button next to the down arrow on the display until Turn Radio On or Turn Radio Off is highlighted, and then press OK.
Print the wireless network test
The wireless network test performs a series of diagnostic tests to determine whether network setup is successful. If an issue is detected, a recommendation on how to correct the issue will be included on the printed report. You can print the wireless network test at any time.
To print the wireless test report
1.Press the Wireless button on the product.
2.Press the button next to the down arrow on the display until Wireless Network Test is highlighted, and then press OK.
The Wireless Network Test prints.
10 Network setup