Wireless-G VPN Broadband Router

How to Establish a Secure IPSec Tunnel

Step 1: Create an IPSec Policy

1.Click the Start button, select Run, and type secpol.msc in the Open field. The Local Security Setting screen will appear.

2.Right-click IP Security Policies on Local Computer (Win XP) or IP Security Policies on Local Machine (Win 2000), and click Create IP Security Policy.

3.Click the Next button, and then enter a name for your policy (for example, to_Router). Then, click Next.

4.Deselect the Activate the default response rule check box, and then click the Next button.

5.Click the Finish button, making sure the Edit check box is checked.

Step 2: Build Filter Lists

Filter List 1: win->Router

1.In the new policy’s properties screen, verify that the Rules tab is selected. Deselect the Use Add Wizard check box, and click the Add button to create a new rule.

2.Make sure the IP Filter List tab is selected, and click the Add button.

Appendix D: Configuring IPSec between a Windows 2000 or XP Computer and the Router

Figure D-1: Local Security Screen

NOTE: The references in this section to “win” are references to Windows 2000 and XP.

NOTE: The text on your screen may differ from the text in your instructions regarding the OK or Close buttons; click the appropriate button on your screen.

Figure D-2: Rules Tab

Figure D-3: IP Filter List Tab

100

How to Establish a Secure IPSec Tunnel

Page 110
Image 110
Mitel WRV54G How to Establish a Secure IPSec Tunnel, Create an IPSec Policy, Build Filter Lists, Filter List 1 win-Router