Vidikron VL-26HD, VL-32HD manual 1Introduction, About This Manual

1Introduction

This Owner’s Manual describes how to install, set up and operate the Vidikron VL-26 and	1.1
VL-32 LCD Displays. Throughout this manual, the Vidikron VL-26 and VL-32 LCD Displays are	About This Manual
referred to simply as the “DView.”
Vidikron has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the DView.
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Vidikron product manuals on-line, at www.vidikron.com.
Vidikron welcomes your comments about this manual. Send them to info@vidikron.com.	If You Have Comments About
	This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify the	Textual and Graphic
information and instructions provided:	Conventions

•Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your computer keyboard if it has both keys.

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type [S4E0002.”

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Vidikron VL-26/VL-32 Owner’s Operating Manual 1