Vidikron VL-32HD, VL-26HD manual Connections to the DView, Rear Connector Access, Source Components

Installation

3.4

Connections to the DView

Proceed as follows to connect the DView to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

•Use the left audio input when connecting mono audio sources.

Rear Connector Access ➤	To access the left rear connector panel, push down on the plastic clip holding the cover in
	place. Then, pull firmly on the cable access cover to open it.
Connecting the DView to ➤	Connect your video sources to the DView as shown and described in the sections that follow.
Source Components	Antenna/Cable TV Connection: Connect your antenna or cable television source to the ANT
	jack on the rear of the DView; see Figure 3-1.

Input Panel

INPUT3

or

Cable Television

Network

Figure 3-1. Antenna/Cable TV Connection

16 Vidikron VL-26/VL-32 Owner’s Operating Manual