NAD T744 owner manual Setting UP the T, Getting Started, Dealing with HUM and Noise

Page 14

SETTING UP THE T 744

GETTING STARTED

Before you make the first connection to your T 744, you should have the arrangement of your listening room/ home theater components and furniture mapped out, at least initially. Unfortunately, a discussion of the vital questions of loudspeaker placement and listening/viewing positions is beyond our scope here. Suffice it to say that these two questions will influence your system's ultimate performance every bit as powerfully as your selection of electronics and speakers. Your NAD audio specialist dealer will be happy to advise you, and to recommend reference materials.

NOTE: You will need the HTR 2 remote handset to configure your T 744. See “Using the HTR 2 Remote”, below.

DEALING WITH HUM AND NOISE

Hum and noise sometimes prove a challenge in complex, multichannel audio systems. Note these consider- ations to help prevent hum and noise problems:

Power all your system's audio component from AC outlets originating from the same circuit of your house wiring. As far as possible, power all audio components from the same outlet, or adjacent outlets on the same circuit. It may be useful to power video displays (and computers!) from outlets on another circuit, especially if that circuit is supplied from the other "leg" of the house wiring.

Do not bundle analog audio cables with AC power cables, or with coaxial digital-audio cables. It is best if they cross at right angles if they must be in close proximity.

Employ high-quality, well-shielded audio cable throughout, and ensure that all connections are secure.

A pencil-eraser can be used to burnish copper- and gold-plated contacts to ensure good, low-resistance contact; specialized contact-cleaners can also be useful. Avoid unnecessary unplugging and re-plugging, since the gold (or copper) contact plating of typical cable connectors, even very high-quality ones, is very thin and easily worn.

Track down hum/noise problems one component at a time, working backwards from the receiver. That is: Connect the speakers to the receiver only, and check for hum. Then connect one component only (a CD player, for example) alone, with no other components connected and check for hum. Connect additional components, one at a time, to the receiver and check for hum. At each stage, if hum/noise appears, examine the audio cabling and AC-power routing of the new component. In some cases, moving the new component's AC cord to a different outlet, or installing a ground-lift (3-to-2-prong adapter) on its power cord, will eliminate the hum.

14

Image 14
Contents English Precautions Safety InformationExplanation of Graphical Symbols InstallationDamage Requiring Service Electric PowerMaintenance Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Troubleshooting Specifications Getting the Most from the NAD TWHAT’S in the BOX Unpacking and SetupConnecting AM Antenna Choosing a LocationEase of USE About the TR.S. and Digital Surround IntegrationAbout the HTR 2 System Remote Control UpgradabilityQuickstart Play a DVD MovieFront Panel SearchDigital Input Jack Default Assignment Rear Panel +12V Trigger IN/OUTRear Panel Dealing with HUM and Noise Setting UP the TGetting Started About the ON-SCREEN Displays OSD and FRONT-PANEL Readout Input SetupInput Settings Display the OSDListening Mode Speaker SetupSpeaker Settings Front L/R CenterSetting Channel Balance CHANNEL-BALANCE Test SetupUsing AN SPL Meter Setting Speaker DistanceRecalling Presets Creating and Using PresetsCreating Presets Using the T Selecting Radio Presets Tuning StationsSetting Radio Presets Choosing the FM Mute / ModeDolby PRO Logic II Surround Dolby DigitalDolby PRO Logic Dolby PRO Logic II MovieAbout the T 744S Listening Modes EarsDTS Displaying the Signal ModeSelecting Listening Modes Adjusting Listening Modes To Adjust Channel Levels Surround Sound Channel ChartAdjusting Channel Levels on the FLY Adjusting the Tone ControlsControlling the T Using the HTR 2 Remote ControlSpecifications Learning Codes from Other RemotesPUNCH-THROUGH Copy a Command from Another KEYMacro Commands Recording MacrosDelete Mode KEY-ILLUMINATION TimeoutFactory Reset Loading CODE-LIBRARIESAssigning the Trigger Output Trigger SetupSummary of HTR 2 Modes Troubleshooting Condition Possible Causes Possible SolutionssAV Surround Sound Receiver T SpecificationsPhysical Specifications Amplifier SectionNAD

T744 specifications

The NAD T744 is a versatile AV receiver that stands out for its powerful performance and user-friendly features. Designed for both home theater enthusiasts and casual listeners, the T744 delivers high-quality audio and video transmission, making it a compelling addition to any multimedia setup.

One of the T744’s main features is its robust audio processing capabilities. It supports a variety of surround sound formats, including Dolby Digital and DTS, allowing for immersive audio experiences. With its 7.1 channel amplification, this receiver can drive multiple speakers, creating a dynamic soundstage that enhances movie nights, music listening, and gaming sessions alike.

The T744 integrates several advanced technologies that contribute to its impressive performance. One notable technology is NAD's proprietary PowerDrive, which ensures the receiver can deliver high output power with low distortion, resulting in clear, controlled audio even at high volumes. This feature is particularly beneficial for those who enjoy watching action-packed movies or listening to high-energy music.

Another significant characteristic of the NAD T744 is its intuitive user interface. The receiver is equipped with a user-friendly remote control and an on-screen display that simplifies setup and operation. Users can easily navigate through various inputs and settings, allowing for seamless transitions between different media sources. The T744 also includes multiple HDMI inputs, making it compatible with modern devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its audio and video capabilities, the T744 also supports multi-room audio functionality. This means users can connect additional amplifiers or speakers throughout their home, allowing for synchronized playback in different areas. This feature is perfect for those who want to enjoy their favorite music throughout their home without needing to switch systems.

Overall, the NAD T744 combines high-performance audio technology with practical features, making it an excellent choice for anyone looking to enhance their home entertainment experience. Its combination of power, flexibility, and ease of use ensures that it caters to a wide range of audio-visual needs, making it a standout option in the AV receiver market.