NAD T744 owner manual About the T 744S Listening Modes, Ears

Page 22

USING THE T 744

ABOUT THE T 744'S LISTENING MODES

The T 744 receiver offers nine distinct listening modes, tailored for different types of recordings or program material. The table below lists which modes are available to what input signals.

With a two-channel (STEREO) source the following listening modes can be selected:

Stereo

Downmix

All output is directed to the left/right-front channels; low frequencies are directed to the subwoofer if one is present in the Speaker settings. Select Stereo when you wish to listen to a stereo (or monaural) production, such as a music CD or FM broadcast, without surround enhancement. Stereo recordings, whether in PCM/digital or analog form and whether surround-encoded or not encoded, are reproduced as recorded; multichannel digital recordings (Dolby Digital and DTS) are reproduced in “Downmix” mode via the left- and right-front channels only, as Lt/Rt (left/right-total) signals.

Dolby Pro Logic

Dolby Pro Logic II (PLII)

Two-channel recordings, whether stereo or surround-encoded, are reproduced with Dolby Pro Logic, or ProLogic II surround processing, yielding output to left-, center-, and right-front channels, and discrete left/right surround channels (assuming these are present in the current <Speakers Setup>. PLII does not employ the surround back speakers (if any).

NOTE: ProLogic II is a more recent evolution of the original Dolby ProLogic surround processing that yields more stable imaging and full bandwidth sound to the rear channels in Movie mode, offering sound that is more similar to Dolby Digital decoding.

The T 744 provides two PLII variations: MOVIE and MUSIC. See “Adjusting Listening Modes,” below.

EARS

Two-channel recordings, whether stereo or surround-encoded, are reproduced with proprietary NAD surround processing with signals output to the left, center-, and right-front channels and discrete left/ right surround channels, plus subwoofer (assuming these are present in the current <Speakers Setup>); EARS does not employ the surround back speakers (if any). EARS extracts the natural ambience present in nearly all well-produced stereo recordings. It does not synthesize any ambience or other sonic elements and thus remains truer to the sound of the original musical performance than most other music-surround options.

Select EARS for listening to stereo music recordings and broadcasts. EARS produces a subtle but highly natural and believable ambience from nearly all "natural-acoustic" stereo recordings; typically, these include classical, jazz, and folk genres as well as numerous examples from others. It's virtues include a realistic, stable "front-stage" sonic imaging and spacious but unexaggerated ambient "virtual acoustics" that remain faithful to the original recording.

Enhanced-Stereo 1 (ST1)

All recordings reproduced in stereo via the maximum speaker complement configured in the current <Speakers Setup>. ST1 can be useful for maximum volume from all channels, or for multi-speaker background music (cocktail party) listening.

Enhanced-Stereo 2 (ST2)

All recordings reproduced in stereo via the surround speakers only (plus subwoofer, if any), assuming these are configured in the current <Speakers Setup>. ST2 can prove useful in certain late-night or very low-volume listening situations.

22

Image 22
Contents English Precautions Safety InformationExplanation of Graphical Symbols InstallationDamage Requiring Service Electric PowerMaintenance Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Troubleshooting Specifications Getting the Most from the NAD TWHAT’S in the BOX Unpacking and SetupConnecting AM Antenna Choosing a LocationEase of USE About the TR.S. and Digital Surround IntegrationAbout the HTR 2 System Remote Control UpgradabilityQuickstart Play a DVD MovieFront Panel SearchDigital Input Jack Default Assignment Rear Panel +12V Trigger IN/OUTRear Panel Getting Started Setting UP the TDealing with HUM and Noise About the ON-SCREEN Displays OSD and FRONT-PANEL Readout Input SetupInput Settings Display the OSDListening Mode Speaker SetupSpeaker Settings Front L/R CenterSetting Channel Balance CHANNEL-BALANCE Test SetupUsing AN SPL Meter Setting Speaker DistanceCreating Presets Creating and Using PresetsRecalling Presets Using the T Selecting Radio Presets Tuning StationsSetting Radio Presets Choosing the FM Mute / ModeDolby PRO Logic II Surround Dolby DigitalDolby PRO Logic Dolby PRO Logic II MovieAbout the T 744S Listening Modes EarsSelecting Listening Modes Displaying the Signal ModeDTS Adjusting Listening Modes To Adjust Channel Levels Surround Sound Channel ChartAdjusting Channel Levels on the FLY Adjusting the Tone ControlsControlling the T Using the HTR 2 Remote ControlSpecifications Learning Codes from Other RemotesPUNCH-THROUGH Copy a Command from Another KEYMacro Commands Recording MacrosDelete Mode KEY-ILLUMINATION TimeoutFactory Reset Loading CODE-LIBRARIESSummary of HTR 2 Modes Trigger SetupAssigning the Trigger Output Troubleshooting Condition Possible Causes Possible SolutionssAV Surround Sound Receiver T SpecificationsPhysical Specifications Amplifier SectionNAD

T744 specifications

The NAD T744 is a versatile AV receiver that stands out for its powerful performance and user-friendly features. Designed for both home theater enthusiasts and casual listeners, the T744 delivers high-quality audio and video transmission, making it a compelling addition to any multimedia setup.

One of the T744’s main features is its robust audio processing capabilities. It supports a variety of surround sound formats, including Dolby Digital and DTS, allowing for immersive audio experiences. With its 7.1 channel amplification, this receiver can drive multiple speakers, creating a dynamic soundstage that enhances movie nights, music listening, and gaming sessions alike.

The T744 integrates several advanced technologies that contribute to its impressive performance. One notable technology is NAD's proprietary PowerDrive, which ensures the receiver can deliver high output power with low distortion, resulting in clear, controlled audio even at high volumes. This feature is particularly beneficial for those who enjoy watching action-packed movies or listening to high-energy music.

Another significant characteristic of the NAD T744 is its intuitive user interface. The receiver is equipped with a user-friendly remote control and an on-screen display that simplifies setup and operation. Users can easily navigate through various inputs and settings, allowing for seamless transitions between different media sources. The T744 also includes multiple HDMI inputs, making it compatible with modern devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its audio and video capabilities, the T744 also supports multi-room audio functionality. This means users can connect additional amplifiers or speakers throughout their home, allowing for synchronized playback in different areas. This feature is perfect for those who want to enjoy their favorite music throughout their home without needing to switch systems.

Overall, the NAD T744 combines high-performance audio technology with practical features, making it an excellent choice for anyone looking to enhance their home entertainment experience. Its combination of power, flexibility, and ease of use ensures that it caters to a wide range of audio-visual needs, making it a standout option in the AV receiver market.