Sharp XR-30S, XR-30X, XR-40X operation manual Adjusting the Projector Function PRJ ADJ Menu

Adjusting the Projector Function (“PRJ - ADJ” Menu)

	Picture	SCR - ADJ		PRJ - ADJ		Help
Auto Power Off					On
Auto Restart					On
STANDBY Mode					Standard
System Sound					On
Speaker					On
Audio Input					Audio 1
RS-232C					9600 bps
Fan Mode					Normal
System Lock					Disable
	Lamp Timer(Life)		0	h	0 min	100%
	SEL./ADJ.		ENTER			END

Menu operation n Page 37

3 STANDBY Mode

When set to “Eco”, power consumption is reduced in standby mode.

Selectable	Description
items
Eco	The monitor output and RS-232C functions
	are switched off in standby mode.
Standard	The monitor output and RS-232C
	functions are activated even if the
	projector is in standby mode.

1 Auto Power Off Function

Selectable	Description
items
On	When no input signal is detected for
	more than 15 minutes, the projector will
	automatically enter standby mode.
Off	The Auto Power Off function will be
	disabled.

4 Setting the Confirmation Sound (System Sound)

Selectable	Description
items
On	A confirmation sound is made when
	the projector turns on/off.
Off	No confirmation sound is made.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

2 Auto Restart Function

Selectable	Description
items
On	If the power cord is unplugged from the
	outlet or the breaker switch is turned off
	when the projector is on, then the
	projector automatically turns on when
	the power cord is plugged into the AC
	outlet or the breaker switch is turned on.
Off	The projector does not turn on
	automatically when the power cord is
	plugged into the AC outlet or the
	breaker switch is turned on.

5 Speaker Setting

Selectable	Description
items
On	The audio signal is output from the
	internal speaker.
Off	The audio signal is not output from the
	internal speaker.

6 Audio Input

This function allows you to select an appropriate combination of audio input terminals for each input mode.

Selectable	Description
items
Audio 1	The AUDIO 1 input terminal is used as
	an audio input terminal.
Audio 2	The AUDIO 2 input terminal is used as
	an audio input terminal.

Features Useful

43