Setting up the Screen
For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing diffi cult.
•For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing diffi cult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
■Place the projector at the required distance from the screen according to the desired picture size.
Example of standard setup
Side View
H | Screen | Lens center |
|
L
[AN-PH814EZ/AN-PH818EZ/AN-PH823EZ/AN-PH845EZ]
|
|
|
|
| Lens center | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Screen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
H1 |
|
|
|
| Lower lens shift | ||||||
|
|
|
|
|
|
| position | ||||
|
|
|
|
|
|
| (High mount setup) | ||||
|
|
|
|
|
H2 | Lens center |
| |
L | Upper lens shift |
position | |
| (Desktop setup) |
Top View |
| |
Screen |
|
|
| Lens center | Leftmost lens shift |
W | position | |
Center of screen |
| |
| Lens center | Rightmost lens shift |
|
| |
|
| position |
•The distance from the screen to the projector may vary depending on the size of the screen.
•The default setting can be used, when placing the projector in front of the screen. If the projected image is reversed, readjust the setting to “Front” in the “PRJ Mode” menu. (See page 49 of the projector's operation manual.)
•Place the projector so that an imaginary horizontal line that passes through the center of the lens is perpendicular to the screen.