Visioneer 9450 Manually Setting the Scan Area, To manually set an output area

ADJUSTING THE IMAGE WITH THE SCAN MANAGER 25

MANUALLY SETTING THE SCAN AREA

You can manually adjust the output area to scan specific sections of an image. For example, if you’re scanning a photograph and want to focus on one section, manually setting the output size removes the rest of the photograph from the final scanned image.

Move pointer

Manually set scan area

Resize pointer

Output Dimensions

To manually set an output area:

1.Put the mouse pointer on an edge of the scan area box so it becomes a resize pointer and then drag to set a new size for the box.

2.To move the box, put the mouse pointer inside the box so the pointer becomes a four-headed arrow. Drag to move the box to a new position.

3.The output dimensions change to reflect the new scan area size.

Now, when you scan, only the area inside the scan area box is scanned to the PaperPort Desktop.

Note: If you want to reset the scan area to the full size of the image again, click the Preview Auto-Area button.