Visioneer 9650 Connect and Power on the Scanner, To connect the scanner and turn the power on

STEP 2: CONNECT AND POWER ON THE SCANNER 9

STEP 2: CONNECT AND POWER ON THE SCANNER

Before installing the software, connect the ADF cable, connect the scanner to a power source, and turn the power on.

To connect the scanner and turn the power on:

1. Plug the ADF cable into the ADF port on the body of the scanner.

2.Plug the power supply into its power port on the scanner.

Note: Only use the power supply (ADP-20LB Rev. B made by Delta Electronics, Inc.) included with your scanner. Connecting any other type of power supply may damage your scanner and will void its warranty.