Visioneer 9650 manual Scanning from Windows 98SE, ME, 2000, or XP

SCANNING FROM WINDOWS 98SE, ME, 2000, OR XP 21

8.Click the Scan button at the bottom of the Scan pane.

The Scan Manager opens. Use the Scan Manager to select scanning options and to start the scanner.

9.From the Scan Method drop-down list, choose whether you are going to scan a single item (Flatbed) or a stack of items (ADF).

Choose Flatbed to scan a single item

Choose ADF to scan a stack of documents

Click Preview to check the image

Click Scan when you’re ready to scan

10.If you want to see what the scanned image will look like before scanning its final image, click the Preview button.

The scanner scans a preview of the item and displays it in the Scan Manager. You can now use the options on the Scan Manager to fine-tune the image. For example, to adjust the brightness, drag the Dark/Light slider. For details on adjusting images, see “Adjusting the Image with the Scan Manager” on page 24.

Note: If you preview when scanning a stack of documents, the first page of the stack feeds through the ADF for the preview. After adjusting the scanner settings, replace that page on the stack so it is scanned with the rest of the pages.

11.To preview the item with the new settings, click the Preview button again on the Scan Manager.