Visioneer manual Connecting the Scanner, To connect your Visioneer 4400 USB scanner

Page 8

54400 USB SCANNER INSTALLATION GUIDE

CONNECTING THE SCANNER

Your Visioneer 4400 USB scanner connects to any available USB port.

Check your computer’s manual for the USB port location.

Note: You do not have to shut off the power to your computer when connecting the scanner.

To connect your Visioneer 4400 USB scanner:

1.Plug the USB cable on the back of your scanner into any USB port on your computer.

If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.

Note: If you have not installed the software yet, unplug the cable from the computer and install the software now. When the software installation is complete a message tells you to connect the scanner.

2.Plug the power supply cable into the jack on the back of the scanner, then plug the power supply into a wall outlet.

Power supply

USB Cable

Image 8

Contents Visioneer 4400 USB Scanner Installation Guide P Y R I G H T I N F O R M a T I O N Selecting a Predefined Scanner Setting Welcome WHAT’S in the BOXUSB cable To get help while using the PaperPort software What YOU NeedGetting Help To use the scanner and software, you need the followingInstalling the Scanner Software To install the scanner softwareConnecting the Scanner To connect your Visioneer 4400 USB scannerSetting UP the Scanner To set up the scannerScanning AN Item To scan an itemScanning AN Item USB Scanner Installation Guide Adjusting Scanner Settings Selecting a Predefined Scanner Setting Scan Page For Default Setting To Scan DescriptionSelecting Scan Configuration Options Customizing a Scanner Setting To create a new scanner settingAdjusting the Brightness and Contrast To adjust brightness and contrastSelecting the Area of the Item YOU Want to Scan To select the area you want to scanCleaning the Scanner Glass Visioneer 4400 USB Scanner Specifications