Visioneer 6400, 6200 manual Scanning for the First Time, If your scanner is connected to a USB port

Page 24

20VISIONEER 6200/6400 SCANNER INSTALLATION GUIDE

Please see the Readme ﬁle in the PaperPort directory on your computer’s hard drive. The Readme ﬁle contains additional information that may help you diagnose problems connecting the scanner.

To reconnect the scanner if it is connected to a parallel port:

1. Right-click the scanner icon with the red X over it.

The shortcut menu appears.

2.Choose Connect from the shortcut menu.

The software ﬁnds the scanner and makes the connection.

The scanner icon will no longer have a red X through it, and you’re ready to begin scanning.

If your scanner is connected to a USB port:

■See “Checking a Scanner Connected to a USB Port” on page 17 to test the scanner using Scanners and Cameras setting in the Control Panel.

If you try all the troubleshooting procedures described above and in the Readme ﬁle and the scanner is not working, see the technical support card that came with your scanner for technical assistance telephone numbers. Also visit our web site at www.visioneer.com for additional technical information.

SCANNING FOR THE FIRST TIME

To scan an item, you simply press the button on the scanner. The OneTouch software automatically scans an item, uses the color setting, and selects the PaperPort software as the default destination application.

Image 24

Contents Visioneer 6200/6400 Scanner P Y R I G H T I N F O R M a T I O N B L E O F C O N T E N T S Ii Table of Contents Welcome WHAT’S in the BOXVisioneer 6200/6400 Scanner Rear of 6400 ScannerVisioneer 6200/6400 Scanner What YOU Need Getting the Paperport Software USER’S GuideInstalling to a USB Port Installing the Paperport SoftwareTo install the PaperPort software Visioneer 6200/6400 Scanner Installation Guide Connecting to a USB Port To connect the Visioneer scanner to a USB portScanner Unlocked position Power cord Installing to a Parallel Port Connecting to a Parallel PortTo connect the 6400 scanner to a parallel port Visioneer 6200/6400 Scanner Installation Guide Unlocked position Power cord Parallel cable to Checking Your Scanner Checking a Scanner Connected to a Parallel Port To check the status of the scannerChecking a Scanner Connected to a USB Port Visioneer 6200/6400 Scanner Installation Guide Click the Test Scanner or Camera button If the Scanner is not Properly ConnectedScanning for the First Time If your scanner is connected to a USB portTo test your scanner Thumbnail image Scanning from the Onetouch Software To scan by pressing the button on the scannerConfiguring the Onetouch Software To conﬁgure the OneTouch softwareCurrent About the Onetouch Configuration Dialog BOX Windows, choose Programs from the Start menu Getting Help in the Onetouch Software Selecting a Different Configuration To create a new conﬁgurationCreating NEW Configurations Adjusting Scan Settings and page SettingsTo adjust the scan settings and page settings Visioneer 6200/6400 Scanner Installation Guide Scanning from the ONE Touch Software About Jpeg Compression Scanning from the ONE Touch Software Setting Preferences To set preferencesThese options are not available with USB Changing the Linked Application To select a different applicationDouble-clickScanners and Cameras Scanning from the Paperport Software To set up the PaperPort software with the scanner Scanning AN Item with the Twain ButtonTo scan an item Visioneer Scan Manager dialog box appears Visioneer 6200/6400 Scanner Installation Guide Thumbnail image Bitmap icon Adjusting the Brightness and Contrast To adjust the brightness and contrastGetting Help with the Paperport Software About the Predefined Scan Settings in Paperport Scan Page For Default Setting To Scan DescriptionCleaning the Scanner Glass Visioneer Scanner Specifications