Visioneer 3100, 6000, 6100 manual Power cord Scanner cable Printer cable

Page 6

6PAPERPORT FLATBED SCANNER INSTALLATION GUIDE

▼NOTE: If you want to “daisy-chain” the scanner and a Zip drive so they share the port, ﬁrst connect the Zip drive to the computer, then connect the scanner to the Zip drive.

7.Plug the power adapter cable into the jack on the PaperPort scanner.

8.Plug the power adapter into an AC (wall) outlet.

The power-on light on the front of the scanner comes on indicating the scanner is receiving power.

The following diagram show the cable connections.

Power cord

Scanner cable

Printer cable

9.Turn on your computer. You’re ready to begin installing the PaperPort software.

▼NOTE: On some PaperPort scanners the power-on light remains lit when the computer is turned off. This is normal even though the computer is turned off.

Image 6

Contents Welcome WHAT’S in the BOXWhat YOU Need Getting the Paperport USER’S GuideTo use the scanner and software, you need the following Scanner To printerTo get help while using the PaperPort software Scanner FeaturesFeature Getting HelpConnecting the Scanner to Your Computer To connect the PaperPort scannerPower cord Scanner cable Printer cable Installing the Paperport Software To install the PaperPort softwareSetting UP the Scanner To set up the scannerScanning AN Item To scan an itemPaperPort Desktop Adjusting Scan Settings Selecting a Predefined Scan SettingScan Page For Default Setting To Scan Description To select a scan settingCustomizing a Scan Setting To customize a scan settingScanning in Color Adjusting the Brightness and Contrast To adjust brightness and contrastTo scan in color Selecting the Area of the Item YOU Want to Scan To select the area you want to scan This section only applies to the PaperPort 6000B scanner Cleaning the Scanner Glass Paperport Scanner Specifications Declaration of Conformity EN 50081-1 Paperport Flatbed Scanner Installation Guide