Visioneer 3100, 6000, 6100 manual Selecting the Area of the Item YOU Want to Scan

Page 15

ADJUSTING SCAN SETTINGS 15

SELECTING THE AREA OF THE ITEM YOU WANT TO SCAN

▼NOTE: The steps for selecting the area to scan are slightly different for the PaperPort 6000B scanner. If you have a PaperPort 6000B scanner please skip this section and see page 17.

By default, the PaperPort software automatically scans an entire item placed on the scanner. However, you may want to select only a certain area of an item to scan. Selecting an appropriate scan area can result in a faster scan and a smaller file size.

To select the area you want to scan, you can use the predefined scan area icons or manually select an area. For example, if you have a photo that is letter size, but you want to scan only an area approximately 6 x 8 inches, you can use the A5 icon to set these dimensions for you. The Predefined scan areas are as follows:

■Auto—Automatically sets the entire item as the scan area. By default, Auto is selected.

■Card—Scans an area 4 x 2.5 inches (10.2 x 6.4 cm), equivalent to an average business card.

■A5—Scans an area 5.8 x 8.3 inches (14.8 x 21 cm).

■B5—Scans an area 7.2 x 10.1 inches (18.2 x 25.7 cm).

■Letter—Scans an area 8.5 x 11 inches (21.6 x 27.9 cm).

■A4—Scans an area 8.3 x 11.7 inches (21 x 29.7 cm).

If you don’t select an icon, Auto is automatically selected. You can also manually select the area that is scanned by dragging the borders surrounding the preview image to reduce or enlarge the area.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents WHAT’S in the BOX WelcomeWhat YOU Need Getting the Paperport USER’S GuideTo use the scanner and software, you need the following To printer ScannerGetting Help Scanner FeaturesFeature To get help while using the PaperPort softwareTo connect the PaperPort scanner Connecting the Scanner to Your ComputerPower cord Scanner cable Printer cable To install the PaperPort software Installing the Paperport SoftwareTo set up the scanner Setting UP the ScannerTo scan an item Scanning AN ItemPaperPort Desktop Selecting a Predefined Scan Setting Adjusting Scan SettingsTo select a scan setting Scan Page For Default Setting To Scan DescriptionCustomizing a Scan Setting To customize a scan settingScanning in Color Adjusting the Brightness and Contrast To adjust brightness and contrastTo scan in color Selecting the Area of the Item YOU Want to Scan To select the area you want to scan This section only applies to the PaperPort 6000B scanner Cleaning the Scanner Glass Paperport Scanner Specifications Declaration of Conformity EN 50081-1 Paperport Flatbed Scanner Installation Guide
Top Page Image Contents