Arcam C30, P35, P1 manual Technical specifications, Continual Improvement Policy

Technical specifications

C30

P35

P1

Continuous power output (20Hz—20kHz at 0.5% THD), per channel

Both channels, 8Ω, 20Hz—20kHz		100W
Single channel, 8Ω, 20Hz—20kHz		150W	170W
Both channels, 4Ω, 20Hz—20kHz		140W
Single channel, 4Ω, at 1kHz		200W	250W
Three channels, 8Ω, 20Hz—20kHz		90W
Harmonic distortion, 80% power, 8Ω at 1kHz		0.005%	0.003%
Inputs
Phono cartridge:
Input sensitivity	2.7mV (MM); 270µV (MC)
Input impedance	47kΩ (MM); 300Ω (MC)
Signal/noise ratio (CCIR)	–79dB (MM); –73dB (MC)
Overload margin	35dB
Line and tape inputs:
Nominal sensitivity	250mV—2V	800mV
Input impedance	22kΩ	22kΩ
Signal/noise ratio (CCIR)	–103dB	–110dB
Tone controls, max. boost/cut	±12dB @ 80Hz and 12kHz
Power amplifier input
Nominal sensitivity		800mV	906mV (Arcam gain)
Input impedance		22kΩ	22kΩ
Gain		31.5dB	31.5dB (Arcam gain)
Preamplifier output
Nominal output level	700mV
Maximum output level	8V RMS
Output impedance	<50Ω
Headphone output
Maximum output level into 600Ω	5V
Output impedance	4.7Ω
General
Mains voltage	115V or 230V	115V or 230V	115V or 230V
Power consumption (maximum)	30VA	800VA (950VA for P35/3)	800VA
Power consumption (standby)	2VA	2VA	2VA
Dimensions W x D x H (including feet)	430 x 370 x 110mm	430 x 350 x 110mm	430 x 350 x 110mm
Weight (net)	9.3kg	9.5kg (10.5kg for P35/3)	12.5kg
Weight (packed)	11.5kg	12.5kg (13.5kg for P35/3)	15.5kg
Supplied accessories	mains lead	mains lead	mains lead
	CR-389 remote control
	2 x AAA batteries
E&OE

CONTINUAL IMPROVEMENT POLICY	NOTE: All specification values are typical unless otherwise stated.
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.

14