Installation: P35 and P1 power amplifiers
|
|
| + R/CH1 – | + L/CH2 – | |
|
|
|
|
| SP2 |
|
| TRIG |
| 4 – 16 OHMS | |
|
| OUT |
|
|
|
| VOLTAGE |
|
|
| SP1 |
| SELECT |
|
|
| |
| 230V | REMOTE |
|
|
|
|
| IN | + R/CH1 | – | + L/CH2 – |
POWER INLET |
|
| |||
|
|
|
|
|
P35 POWER AMPLIFIER: REAR PANEL
| SPEAKERS | ||
| + | – | |
TRIG | REMOTE |
| |
OUT | IN |
| |
VOLTAGE |
|
| |
SELECT |
|
| |
230V | + | – | |
POWER INLET | |||
4 – 16 OHMS | |||
|
|
|
| + CTR/CH3 – |
|
|
|
| SP2 | CTR/CH3 |
AUDIO |
|
|
| |
| LINK | 4 – 16 OHMS |
| |
|
| AUDIO | ||
L |
|
| ||
|
|
| IN | |
R |
|
| SP1 | OUT |
|
|
| ||
IN | OUT |
| + CTR/CH3 – |
|
|
|
|
Optional Third Channel Module – provides a third 90W channel suitable for Home Cinema or multi- channel audio use.
AUDIO |
| BALANCED AUDIO | |
IN |
| ||
P1 | XLR | ||
| |||
| ARCAM | PHONO |
OUT | GAIN | XLR/ | OUT | IN |
PHONO |
P1 POWER AMPLIFIER: REAR PANEL
POSITIONINGTHE UNIT
Place your amplifier on a level, firm surface.
Avoid placing the unit in direct sunlight or near sources of heat or damp.
Ensure adequate ventilation. Do not place the unit in an enclosed space such as a bookcase or cabinet as both of these will impede air flow through the unit, which is necessary for cooling.
CONNECTINGTO A POWER SUPPLY
MAINS LEAD
The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer.
WRONG PLUG?
Check that the plug supplied with the unit fits your supply and that your mains supply voltage agrees with the voltage setting (115V or 230V) indicated on the rear panel of the unit before plugging in.
If your mains supply voltage or mains plug is different, consult your Arcam dealer.
This product must be earthed.
PLUGGING IN
Push the plug (IEC line socket) of the power cable supplied with the unit into the socket (POWER INLET) in the back of the unit. Make sure it is pushed in firmly.
Put the plug on the other end of the cable into your power supply socket and switch the socket on.
For remote
This means that even though the power switch is off, it may be possible to hear a slight residual hum coming from the mains transformer inside the amplifier.This is perfectly normal. If the unit is to be left unused for an extended period, we recommend that it is disconnected from the mains supply by switching it off at the wall socket
IMPORTANT:
Ensure that the amplifier is switched off before attempting to connect the speakers, and check carefully any connections made before turning the unit back on.
10