DLP Projjecttor – User’s Manuall
Video/Audio Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Vid- eo/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings.
ITEM
Video AGC
Video Saturation
Video Tint
Film Mode
Video Overscan
Volume
Mute
Reset
DESCRIPTION
Press the ◄► buttons to enable or disable the Automatic Gain Control for video source. Press the ◄► buttons to adjust the video saturation.
Press the ◄► buttons to adjust the video tint/hue. Press the ◄► buttons to select a different film mode. Press the ◄► buttons to enable or disable video over scan. Press the ◄► buttons to adjust the audio volume level. Press the ◄► buttons to turn On or Off the speaker.
Press Enter / ► to reset all settings to default values.
Note:
Video jagging may occur when playing interlace video. To overcome this issue, open the Video / Audio menu and adjust the Film Mode feature.
– 25 –