DLP Projjecttor – User’s Manuall
Installation II Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.
ITEM |
| DESCRIPTION | |
|
|
| |
Auto Power Off | Press the cursor ◄► button to enable or disable automatic shutdown of lamp when no signal. | ||
(min.) | |||
|
| ||
|
| ||
Auto Power On | Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied. | ||
|
| ||
| Press the cursor ◄► button to toggle between Normal and High fan speeds. | ||
Fan Speed | Note: We recommend selecting high speed in high temperatures, high humidity, or high | ||
| altitude areas. | ||
|
| ||
Lamp Mode | Press the cursor ◄► button to select the lamp mode for higher brightness or lower brightness | ||
to save lamp life. | |||
| |||
|
|
| |
OSD Menu Setting | Press | (Enter) / ► to enter the OSD setting menu. See page 18 for more information on | |
OSD setting menu. | |||
| |||
|
|
| |
Peripheral Test | Press | (Enter) / ► to enter the Peripheral Test menu. See page 29 for more information on | |
Peripheral Test. | |||
| |||
|
|
| |
Lamp Hour Reset | Press | (Enter) / ► to confirm lamp hour reset. Press Menu to cancel. See page 29 for more | |
information on Lamp Hour Reset. | |||
| |||
Factory Reset | Press | (Enter) / ► to reset the entire item to default value. See page 30 for more information | |
on Factory Reset. | |||
| |||
Status | Press | (Enter) / ► to enter the Status menu. See page 30 for more information on Status. | |
|
|
| |
– 27 –