A.1
Required Hardware
and Software
To perform these adjustments, you need the following:
•Laptop or desktop PC with a
•A
•A
•Terminal emulation software – HyperTerminal or equivalent.
•Color analyzer – Sencore ColorPro 5000 software and ColorPro III sensor, or equivalent.
Most
sensor. In order to use them for this procedure, your PC must have either two available
If you are using a
A.2
Serial Connections and
Equipment Setup
Connect your PC to the projector and color sensor as shown in Figure
to
Screen
(not included)
6 - 12 in. | COM1 |
| Color Sensor |
USB or COM2
Figure A-2. Equipment Setup for Color Gamut Adjustment
1.Connect a
2.Connect the other end of the serial cable to a
3.Connect the
Runco |