Using the Remote Control
Usable Range
The remote control can be used to control the projector within the ranges shown in the illustration.
Note
•The signal from the remote control can be re- flected off a screen for easy operation. How- ever, the effective distance of the signal may differ depending on the screen material.
When using the remote control:
•Be sure not to drop, expose to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp. In this case, move the pro- jector away from the fluorescent lamp.
Remote control sensor
30°
30°
Remote control signal transmitters
30° | 23' (7 m) |
|
Remote control
Introduction
Inserting the Batteries
The batteries (two
1 Press the ▲ mark on the cover and slide it in the direction of the arrow.
2Insert the batteries.
• Insert the batteries making sure the po-
larities correctly match the 
and 
marks inside the battery compartment.
3 Attach the cover and slide it un- til it clicks into place.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
•Insert the batteries making sure the polarities correctly match the 
and 
marks inside the battery compart- ment.
•Batteries of different types have different properties, therefore do not mix batteries of different types.
•Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
•Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak. Battery fluid from leaked batteries is harmful to skin, therefore be sure to first wipe them and then remove them using a cloth.
•The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries.
•Remove the batteries from the remote control if you will not be using the remote control for a long time.
-15