Sharp PG-B10S Enter the same 4-digit keycode in “Reconfirm”, Press on the remote control or

If you want to change the keycode, follow the procedure below.

Note

•When “Anti-Theft” is selected, the password in- put box will appear. After the password has been entered, you can change the keycode.

1Press the buttons on the remote control or the projector to enter the preset 4-digit keycode in “Old Code”.

2Press any button you like on the re- mote control or the projector to en- ter the new keycode.

3Enter the same 4-digit keycode in “Reconfirm”.

Note

•If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press .

If you want to clear the keycode input box, follow the procedure below.

▼Keycode input box

Note

•When “Anti-Theft” is selected, the keycode in- put box will appear.

•If no keycode is entered, the image will not be displayed, even if the projector receives the in- put signal.

1Press on the remote control or

on the projector to turn on the projector.

2Enter the keycode you set when the keycode input box is displayed.

Note

•When entering the keycode, press the buttons previously set on the projector or the remote control.

MenuUsing the

-47