Sharp PG-C45S operation manual Connecting to Video Equipment

Page 24

Connecting the Projector to Other Devices

Connecting to Video Equipment

Connecting to Video Equipment Using an S-video, a Composite Video or an Audio Cable

Using an S-video, video, or audio cable, a VCR, laser disc player or other audio-visual equip- ment can be connected to INPUT 3, INPUT 4 and AUDIO (L/R) input terminals.

1 Connect the projector to the video equipment using an S- video cable or a composite video cable (both commercially available).

2 Connect the projector to the video equipment using a ø3.5

mmstereo minijack to RCA au- dio cable (commercially avail- able).

Note

•The INPUT 4 (S-VIDEO) terminal uses a video signal system in which the picture is separated into color and luminance sig- nals to realize a higher-quality image. To view a higher-quality image, use a com- mercially available S-video cable to con- nect the INPUT 4 terminal on the projec- tor and the S-video output terminal on the video equipment.

•A ø3.5 mm stereo minijack to RCA audio cable (commercially available) is required for audio input.

VCR or other audio-visual equipment

To S-video output terminal

To video output terminal

To audio output terminal

2ø3.5 mm stereo minijack to RCA

audio cable (commercially available) 1Composite video cable

(commercially available)

1S-video cable (commercially available)

-20

Page 23 Page 25
Image 24
Page 23 Page 25
Contents PG-C45S Model No. PG-C45S Serial No Special Note for Users in the U.K Page Introduction Product Disposal Outstanding Features Color Management SystemNoise Reduction New Edge Up-ScalingContents Appendix Cleaning AccessoriesPower Sources Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check Wall or Ceiling MountingAvoid locations with high or low temperature Using the projector in other countriesTemperature monitor function Rest your eyes occasionallyTo install Acrobat Reader from the CD-ROM For other operating systems For other languagesFor Windows For MacintoshPart Names Projector Front and Top ViewUsing the Kensington Lock Projector Rear ViewRemote Control Front View Remote Control Top ViewPart Names Using the Remote Control Available Range of the Remote ControlWhen using the remote control Inserting the BatteriesAccessories Supplied accessoriesOptional cables Connections and Setup Connecting the Projector to Other Devices Before ConnectingThis projector can be connected to An audio cable commercially available SeeConnecting the Power Cord Connecting to a Computer Using the RGB Cable Ferrite corePlug and Play function when connecting to a 15-pin terminal Connecting to Video Equipment Connecting to Component Video Equipment CableConnecting to an Amplifier Connecting to an Amplifier or Other Audio ComponentsControlling the Projector by a Computer Connecting to a Monitor Watching Images on Both the Projector and a MonitorUsing the Wireless Pre- sentation Function Press or while using presentation software on your computerButton Using as a Wired Remote Control Connecting the Remote Control to the ProjectorSetup Using the Adjustment FeetAdjusting the Lens Focus ring Zoom knobOut Zoom Setting up the Screen Throw DistanceNormal Mode Stretch ModeScreen Size and Projection Distance AN-C12MZ Throw ratio 11.18 to Projecting a Reversed/Inverted Image Projection from behind the screenBasic Operation Basic Procedure Plug the power cord into the wall outletPress on the projector or on the remote control Image ProjectionPress , , or on the remote control to select the Input mode Volume buttonsSelecting the On-screen Display Language Press to temporarily turn off the soundPress Press \ or to select LanPress or to select the de- sired language, and then press Press , , \ and to adjust the Keystone correction Correcting Trapezoidal DistortionKeystone button Enter button Undo button Buttons Test patternUndo button Menu Bar Items Sub menuInput 3 / 4 Mode Main menu Sub menuUsing the Menu Screen Menu Selections AdjustmentsMenu Bar Main Menu Enter button Buttons Menu button Press \ or to select the menu you want to adjust Press or to select the item you want to adjustPress \ or to adjust the item selected Menu Selections Settings Press or to select the item you want to setEnter button Buttons Menu button Cursor shifts to the sub menu Adjusting the Picture Adjusting Image PreferencesSelecting the Signal Type Progressive Mode Adjusting Computer Images When Auto Sync is OFFSaving Adjustment Settings Selecting Adjustment Settings Special Mode SettingsChecking the Input Signal Auto Sync Adjustment Auto Sync Display FunctionScreen display during Auto Sync Auto Sync buttonEasy to Use Functions Selecting the Picture Display Mode Switching the Picture Display Using Different Input SignalsResize button Screen display of the picture display mode Video Displaying a Still Image Freezing a Moving ImageFreeze button Enlarging a Specific Portion of an Image Displaying an Enlarged Portion of an ImageButtons Enlarge Enlarge/ Reduce buttons Adjusting Gamma Correction Gamma Correction FunctionDisplaying Dual Pictures Pict in Pict Displaying the Inset PicturePress to move the inset pic- ture Black Screen Function Blacking out the Pro- jected ImageTo return to the original projected image, press again This function can be used to display a black screenDisplaying the Break Timer Displaying and Setting the Break TimerPress to cancel the break timer Buttons Break Timer buttonSelecting the Color Reproduction Mode Selecting the Target ColorSetting the Brightness of the Target Color Setting the Chromatic Value of the Target ColorSetting the Hue of the Target Color Resetting User-Defined Color Settings Overview of All Color SettingsSetting the Audio Output Type Setting on/off the Internal SpeakerSetting the Audio Out- put Type Setting on/off the Inter- nal SpeakerUsing Auto Search Auto Search FunctionSetting On-screen Display Video Digital Noise Reduction DNR SystemReducing Image Noise Turning Off On-screen DisplaySetting the Video System Setting the Video SystemSaving Projected Images Capturing the ImageDeleting the Captured Image Setting a Background Image Selecting a Startup ImageSelecting a Background Image Selecting a Startup ImageSelecting the Economy Mode Setting the Power Save ModeMonitor Out/RS-232C Off Function Automatic Power Off Function Selecting the Economy ModeDisplaying the Remaining Lamp Life Percentage Checking the Remaining Lamp Life PercentageSetting the Projection Mode Setting up the KeylockReversing/Inverting Projected Images Locking the Operation Buttons on the ProjectorCanceling the Keylock Setting Selecting the Transmission Speed RS-232CSelecting the Transmis- sion Speed RS-232C Setting up a Password Entering the PasswordChanging the Password If You Forget Your PasswordSetting the Anti-Theft Entering the KeycodeChanging the Keycode Enter the same 4-digit keycode in ReconfirmInitializing the Settings Returning to Default SettingsDisplaying the Adjustment Settings Overview of All Menu SettingsAppendix Maintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsCleaning and replacing the bottom air filter Turn off the power and discon- nect the power cordReplacing the Air Filter Remove the bottom filter coverClean the air filter Replace the air filterReplace the filter cover Maintenance Indicators About the temperature warning indicatorAbout the lamp replacement indicator Maintenance Indicators Regarding the Lamp LampReplacing the Lamp Removing and Install- ing the Lamp Unit Press on the projector to turn off the powerDisconnect the power cord Change the air filterResetting the Lamp Timer Connecting Pin Assignments RGB Input Component InputRS-232C Specifications and Command Settings CommandsPC control Communication conditionsRS-232C Specifications and Command Settings Options Control Contents Wired Remote Control Terminal Specifications Specifications of wired remote control inputSharp remote control signal format Function and transmisson codesComputer Compatibility Chart ComputerTroubleshooting Troubleshooting For Sharp Assistance Specifications Ntsc 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAMDimensions Units inches mmGlossary Advanced intelligent compressionIndex 100Stretch 101Sharp Corporation

PG-C45S specifications

The Sharp PG-C45S is a compact, high-performance projector that caters to the needs of professionals and educators alike. This versatile device is designed for presentations, training sessions, and classroom use, delivering impressive image quality that enhances any visual experience.

One of the standout features of the PG-C45S is its high brightness rating of 4,500 ANSI lumens, which ensures clear visibility even in well-lit environments. This feature makes it ideal for conference rooms and classrooms where lighting conditions can vary. The projector uses DLP (Digital Light Processing) technology, which enhances color accuracy and sharpness, providing vibrant and true-to-life images with a resolution of 1024 x 768 (XGA).

The PG-C45S boasts a contrast ratio of 2,000:1, which contributes to deeper blacks and brighter whites, creating a dynamic visual experience that captivates audiences. This projector supports various resolutions, making it compatible with a wide array of input sources, including laptops, DVD players, and gaming consoles.

Furthermore, the Sharp PG-C45S features a range of connectivity options, including HDMI, VGA, and composite video inputs, providing flexibility for different setups. It is equipped with an integrated 10-watt speaker, which delivers clear audio for presentations without the need for additional sound equipment.

The projector also incorporates advanced features such as vertical and horizontal keystone correction, allowing users to easily adjust the image to fit various screen sizes and setups. The easy-to-navigate on-screen display simplifies the setup process, making it user-friendly for those who may not be tech-savvy.

In terms of portability, the PG-C45S is lightweight and designed for easy transport, making it suitable for professionals who need to take their presentations on the go. Its durable construction ensures longevity, while an eco-friendly mode reduces power consumption and extends lamp life, thereby lowering the total cost of ownership.

In conclusion, the Sharp PG-C45S is a reliable and feature-rich projector suitable for a variety of environments. With its impressive brightness, excellent image quality, and user-friendly features, it is a compelling choice for anyone looking to enhance their presentation experience.
Top Page Image Contents