Overview | Installation | Troubleshooting | Contact | FAQ | Glossary | License |
| Configuration: Basic | Advanced | TCP/IP |
|
| |
|
|
|
|
|
|
|
9Connect the power adapter supplied with your voice gateway to the Power port on its rear panel.
10Plug the other end into an AC power outlet.
This turns on your voice gateway. The VT2142 does not have an On/Off power switch. The Power light on the front panel performs a series of blinks as described in “Front Panel” on page 2. You should not unplug your voice gateway when it is not in use.
IMPORTANT: Before you continue, be sure to allow enough time for your voice gateway to complete its
We recommend plugging the VT2142 power adapter into an electrical outlet that is grounded and equipped with a surge protector or UPS.
11Turn on your computer. The Ethernet light on the VT2142 front panel should light.
IMPORTANT: Before you continue, be sure the VT2142 Power, Ethernet, and Internet lights are all on.
12On your computer, open a Web browser such as Microsoft Internet Explorer, Netscape Navigator®, or Mozilla Firefox®.
13Check your Internet connection by visiting any website.
If your Internet connection does not work, continue with step 14.
If your Internet connection works, go to C “Connecting Your Telephone” on page 11.
14Depending on whether your
Cable modem users:
First, as mentioned in step 3, be sure your cable modem remained off for at least 10 minutes before you turned it back on.
If leaving the cable modem unplugged for at least 10 minutes does not correct your problem, you may need to register your VT2142 with your cable provider. Please contact them to update your information. You need to provide them with the WAN MAC ID on the bottom of the VT2142.
When your Internet connection works, go to C “Connecting Your Telephone” on page 11.
VT2142 Voice Gateway User Guide | 9 |