Exposure Note

Product Details for Products Tested for Compliance with Relevant EC Directives

(At this time, only the 5.7 GHz product has been tested for compliance with relevant EC directives.)

	Operating	Maximum	Effective	Modulation	Channel
	Frequency Range	Transmitter	Isotropic	Type	Spacing
		Power	Radiated
			Power (EIRP)
Access Point	5.725 to 5.825 GHz	200mW RMS	1 Watt EIRP	High Index	25 MHz
				BFSK	20 MHz

Subscriber	5.725 to 5.825 GHz	200mW RMS	1 Watt EIRP	High Index	25 MHz
Module				BFSK	20 MHz
Subscriber	5.725 to 5.825 GHz	200mW RMS	63 Watts EIRP	High Index	25 MHz
Module with				BFSK	20 MHz
Reflector
Backhaul	5.725 to 5.825 GHz	200mW RMS	1 Watt EIRP	High Index	25 Mhz
				BFSK	20 MHz

Backhaul	5.725 to 5.825 GHz	200mW RMS	63 Watts EIRP	High Index	25 MHz
with Reflector				BFSK	20 MHz

The Canopy Subscriber Module (SM) must be installed to provide a separation distance of at least 20 cm (7.9 in) from all persons, when adding the Canopy reflector dish (in the 5.7 GHz band), the reflector dish must be installed to provide a separation distance of at least 1.5m (59.1 in) from all persons and does not emit a RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website http://www.hc-sc.gc.ca/rpb.

In both configurations the maximum RMS power does not exceed 200mW.

The applicable power density exposure limit is 10 Watt/m2, according to the FCC OET Bulletin 65, the ICNIRP guidelines, and the Health Canada Safety Code 6. The corresponding compliance distances referenced above have been determined by assuming worst-case scenarios. The peak power density (S) in the far-field of a radio-frequency source with rms transmit power P and antenna gain G at a distance d is

S = P ⋅ G 4π d 2

In the case of the Canopy SM without reflector, the gain is 8 dBi (a factor of 6.3), so the peak power density equals the exposure limit at a distance of 10 cm. A four-fold additional compliance margin is artificially introduced by doubling the distance to 20 cm.

In the case of the Canopy SM with reflector, the gain is 26 dBi (a factor of 400), so the peak power density equals the exposure limit at a distance of about 80 cm. An almost four-fold additional compliance margin is artificially introduced by defining the compliance distance of 1.5 m. The compliance distance is greatly overestimated in this case because the far-field equation neglects the physical dimension of the antenna, which is modeled as a point-source.

Software License Terms and Conditions

ONLY OPEN THE PACKAGE, OR USE THE SOFTWARE AND RELATED PRODUCT IF YOU ACCEPT THE TERMS OF THIS LICENSE. BY BREAKING THE SEAL ON THIS DISK KIT /

SM User Manual Issue 2

Page 3 of 34

SM02-UG-en specifications

The Motorola SM02-UG-en is an innovative and versatile device designed to enhance communication and connectivity in various professional environments. With a primary focus on providing reliable audio quality, this product is particularly valuable for businesses that depend on clear and efficient communication.

One of the standout features of the SM02-UG-en is its advanced audio technology. The device utilizes high-definition audio processing, ensuring that conversations are crystal clear with minimal distortion. This feature is essential for environments where precise communication is crucial, such as in emergency services, public safety, and corporate settings. The clarity offered by the SM02-UG-en significantly reduces the likelihood of miscommunication, enhancing overall operational efficiency.

In terms of connectivity, the SM02-UG-en supports multiple pairing options, allowing users to connect with various devices seamlessly. This flexibility means that users can easily connect to smartphones, tablets, and other communication tools, ensuring they remain connected to their team at all times. The device’s Bluetooth capabilities provide a stable and robust connection, minimizing dropouts even in crowded environments.

The SM02-UG-en is designed with user comfort and convenience in mind. Its lightweight and ergonomic design make it suitable for extended use, reducing fatigue during long shifts or meetings. The adjustable microphone ensures that users can position it optimally for their needs, further enhancing audio quality.

Moreover, the device features an impressive battery life, allowing for prolonged use without the need for frequent recharging. This quality is particularly advantageous for professionals who are on the move, as it eliminates the worry of running out of power during critical moments.

Another notable characteristic of the SM02-UG-en is its durability. Built with robust materials, the device is designed to withstand the rigors of daily use in demanding environments. This durability ensures longevity, making it a worthwhile investment for organizations.

In conclusion, the Motorola SM02-UG-en stands out as a reliable choice for professionals seeking high-quality audio communication solutions. With its advanced audio technology, versatile connectivity options, user-friendly design, and durability, it addresses the needs of contemporary communication demands across various sectors. Whether in a corporate office or an emergency response scenario, the SM02-UG-en is engineered to deliver exceptional performance and clarity.