Desktop Installation

3.On-line Documentation

The diskette that comes with the MasterSwitch™ includes a copy of the MasterSwitch™ - User’s Guide in portable data format (pduguide.pdf). This guide can be read using Acrobat Reader, a free application available from Adobe (http//:www.adobe.com). If you do not have web capabilities, a copy of this guide is available from APC’s FTP site (apccorp.apcc.com).

4.Installation

The MasterSwitch™ , which connects to a 10Base-T Local Area Network (LAN) through the RJ45 jack on the front of the unit, can be used as a freestanding desktop unit or mounted in a NetShelter™ cabinet (or other 19” NEMA rack).

The MasterSwitch™ is equipped with rubber feet for desktop use and can be located wherever space permits:

1. Place the MasterSwitch™ in its permanent location. Make sure that this location is within 15 feet (4.6 meters) of a single-phase, 120-VAC, 15-Amp outlet, and that the back of the unit (receptacle side) will be readily accessible.

2.Plug the male end of your network interface cable (not supplied with the MasterSwitch™ ) into the RJ45 jack on the front of the MasterSwitch™ .

3. Plug the MasterSwitch™ power cord into the single-phase, 120-VAC, 15-Amp outlet.

4. Refer to Section 4 for information on setting up the MasterSwitch™ .