PC*MILERAS/400 MVS User’s Guide | 13 |
|
|
|
|
Step 2.1
For Version 14:
•Run <cdrom>\v14\setup.exe
•If you are installing just PC*MILER 14.0 you will not need a product key code.
•If you are intalling an approved PC*MILERAS/400 Multiple Version Switch data
•Without a product key code, check only the PCMILER 14.0 box and then use Pcd1400001 for the serial number.
The default install location is C:\Pmw140. If you change this, you will need to make adjustments later in the installation. Remember your installation location. You do not need to reboot the PC as directed.
Step 2.2
For Version 15.1:
•Run <cdrom>\v151\setup.exe
•If you are installing just PC*MILER 15.0 you will not need a product key code.
•If you are intalling an approved PC*MILERAS/400 Multiple Version Switch data
•Without a product key code, check only the PCMILER 15.0 box .
The default install location is C:\Pmw150. If you change this, you will need to make adjustments later in the installation. Remember your installation location. You do not need to reboot the PC as directed.
Step 2.3
Version 16.1:
•Run <cdrom>\v161\setup.exe
•If you are installing just PC*MILER 16.1 you will not need a product key code.
•If you are intalling an approved PC*MILERAS/400 Multiple Version Switch data
•Without a product key code, enter ‘Trial’ in the Registration Number dialog.
Do not choose PC*MILERStreets unless you have previously licensed it from ALK and have the Street Level Data CD.