AMD 7ZMMC user manual Memory Installation

Page 16

7ZMMC Motherboard

Memory Installation

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.

Install memory in any combination table:

DIMM

 

168-pin SDRAM DIMM Modules

DIMM 1

 

Supports 16 / 32 / 64 / 128 / 256 / 512 MB

 

DIMM 2

 

Supports 16 / 32 / 64 / 128 / 256 / 512 MB

 

 

 

X 1 pcs

X 1 pcs

￿Total System Memory (Max 1.0GB)

12

Image 16
Contents 7ZMMC FCC Compliance Statement Declaration of Conformity Table Of Content ConnectorsFeature Summary CPU7ZMMC Motherboard Layout 7ZMMCSW1 CPU Speed Setup CPU Speed Setup100 102 103 107 110 113 115 133 Connectors ATX PowerFloppy Connector COM a / VGA / LPT PortJ2 Sysem Fan IDE1 Primary, IDE2 Secondary ConnectorJ3 CPU Fan J9 CD Audio Line J13 Ring Power On Internal Modem Card Wake UpJ12 Wake On LAN JP6 Power Fan JP8 / LED1 STR LED Connector & Dimm LEDPS/2 Keyboard & PS/2 Mouse Port USB 1 Rear USB PortUSB 2 Front USB Connector J11 2x11 Pins Front Panel BAT1 Battery Panel And Jumper Definition JP3 Clear Cmos Function Optional JP4 USB Device Wake up SelectionJP7 STR Function Enable JP9 Bios Write Protect FunctionMemory Installation Status Page Setup Menu / Option Page Setup Menu Bios SetupMain Menu Main Menu Standard Cmos Setup Boot Sector Virus Protection Floppy Drive a / Drive BMemory Base MemoryBios Features Setup Chipset Features Setup AGP Aperture Size ClkGen Spread SpectrumUSB Controller USB Legacy SupportPower Management Setup Resume On RTC Alarm System after AC BackResume On Ring / LAN Resume On PME#PNP/PCI Configurations VGA Boot FromVGA Frame Buffer Size IRQ 3, 4, 5, 7, 9, 10, 11, 14Load Bios Defaults Load Bios Defaults Y/N? NLoad Setup Defaults Load Setup DefaultsIntegrated Peripherals Parallel Port IRQ OnBoard IDEOnBoard AC’97 Audio OnBoard MC’97 ModemHardware Monitor Set Supervisor / User Password PNP/PCI CONFIGURATIONEnter new supervisor passwordIDE HDD Auto Detection Save & Exit Setup Save to Cmos and EXITY/N? YExit Without Saving Quit without saving Y/N ? NAppendix Acronyms