Bios Setup, Main Menu | AMD 7ZMMC specification

7ZMMC Motherboard

BIOS Setup

BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.

ENTERING SETUP

Power ON the computer and press <Del> immediately will allow you to enter Setup. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press <Ctrl> − <Alt>− <Del> keys.

CONTROL KEYS

<↑ >

<↓ >

<← >

<→ >

<Esc>

<+/PgUp>

<-/PgDn>

<F1>

<F2>

<F3>

<F4>

<F5>

<F6>

<F7>

<F8>

<F9>

<F10>

Move to previous item

Move to next item

Move to the item in the left hand

Move to the item in the right hand

Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu

Increase the numeric value or make changes

Decrease the numeric value or make changes

General help, only for Status Page Setup Menu and Option Page Setup Menu

Reserved

Restore the previous CMOS value from CMOS, only for Option Page Setup Menu

Load the default CMOS value from BIOS default table, only for Option Page Setup Menu

Load the Setup Defaults

Reserved

Save all the CMOS changes, only for Main Menu

GETTING HELP

Main Menu

The on-line description of the highlighted setup function is displayed at the bottom of the screen.

Status Page Setup Menu / Option Page Setup Menu

Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.