AMD LX800 user manual Floppy Port, Fdd

Page 18

LE-366 User’s Manual

2.4 <Floppy Port>

The board provides a slim type floppy port; please use the 26-pin FPC cable in the package

to connect the floppy device.

Floppy rear side

FDD

4. Lift up this plastic bar

5. Slot the cable in (Blue paste for outside)

6. Press back the plastic bar

1.Lift up the brown plastic bar

2.Slot the cable in (Blue paste for brown bar side)

3.Press back the plastic bar

-17-

Image 18

Contents LE-366 Copyright DisclaimerTrademark Cable Kit Packing ListHardware Printed MattersIndex Appendix a I/O Port Pin AssignmentPage Is Left For Blank Introduction Product OverviewProduct Specification General SpecificationExpansive Interface Mechanical Drawing Block Diagram Hardware Setup 1Connector LocationJP2 JP3 Jumper ReferenceConnector Reference External ConnectorCPU and Memory Setup CPU SetupMemory Setup Cmos Setup Enhanced IDE & CF Interface Floppy Port FDDOnboard Display Interface Analog VGA InterfaceDigital Display Pin DescriptionPin Assignment LCD Installation Guide Preparing the LE-366,LCD panel and the backlight inverterPanel Number Resolution USB2.0 Interface Gpio Interface Serial Port Jumper Setting Power and Fan Connector Power InputPower Output Fan Connector Indicator and Switch This Page is Left For Blank Bios Setup 1CMOS Setup Utility Main ScreenThis Page is Left for Blank Appendix a I/O Port Pin Assignment IDE PortSerial Port CRT Port LAN PortUSB Port PS/2 Keyboard & Mouse Port This Page is Left for Blank Appendix B Flash Bios Bios Auto Flash ToolFlash Method Appendix C System Resources C1. I/O Port Address MapLE-366 User’s Manual C2. Memory Address Map C3. System IRQ Resources Appendix D Programming GPIO’s GPIO0...GPIO7Appendix E Watch Dog timer Setting Program SampleThis Page is Left for Blank Contact Information Taiwan Commate Computer Inc