AMD LX800 user manual Indicator and Switch

Page 29

LE-366 User’s Manual

2.8 <Indicator and Switch>

The JFRNT provides front control panel of the board, such as power button, reset and

beeper, etc. Please check well before you connecting the cables on the chassis.

Connector: CN3

Type: onboard 14-pin (2 x 7) 2.54-pitch header

Pin	Assignment	Pin	Assignment

1	GND	2	Power Switch

3	BUZZER-	4	BUZZER+

5	HD_LED-	6	HD_LED+

7	POWER LED-	8	Power LED+

9	GND	10	Reset

-28-

Image 29

Contents LE-366 Trademark CopyrightDisclaimer Hardware Packing ListCable Kit Printed MattersAppendix a I/O Port Pin Assignment IndexPage Is Left For Blank Product Overview IntroductionGeneral Specification Product SpecificationExpansive Interface Mechanical Drawing Block Diagram 1Connector Location Hardware SetupJumper Reference JP2 JP3External Connector Connector ReferenceMemory Setup CPU and Memory SetupCPU Setup Cmos Setup Enhanced IDE & CF Interface FDD Floppy PortAnalog VGA Interface Onboard Display InterfacePin Description Digital DisplayPin Assignment Preparing the LE-366,LCD panel and the backlight inverter LCD Installation GuidePanel Number Resolution USB2.0 Interface Gpio Interface Serial Port Jumper Setting Power Output Power and Fan ConnectorPower Input Fan Connector Indicator and Switch This Page is Left For Blank 1CMOS Setup Utility Main Screen Bios SetupThis Page is Left for Blank IDE Port Appendix a I/O Port Pin AssignmentSerial Port USB Port CRT PortLAN Port PS/2 Keyboard & Mouse Port This Page is Left for Blank Flash Method Appendix B Flash BiosBios Auto Flash Tool C1. I/O Port Address Map Appendix C System ResourcesLE-366 User’s Manual C2. Memory Address Map C3. System IRQ Resources GPIO0...GPIO7 Appendix D Programming GPIO’sProgram Sample Appendix E Watch Dog timer SettingThis Page is Left for Blank Taiwan Commate Computer Inc Contact Information