AMD LE-366 user manual CPU and Memory Setup, CPU Setup

Page 15

LE-366 User’s Manual

2.2 <CPU and Memory Setup>

2.2.1 <CPU Setup>

The board integrates AMD Geode LX800 500MHz processor with special design for power appliance. It requires only 3.8W power consumption at most, and is totally designed for fan-less system.

2.2.2 <Memory Setup>

The board supports one 200-pin DDR266/333/400 SDRAM up to 1GB of capacity, and supports non-ECC unbuffered memory modules.

-14-

Image 15

Contents

LE-366 Copyright DisclaimerTrademark Printed Matters Packing ListHardware Cable KitAppendix a I/O Port Pin Assignment IndexPage Is Left For Blank Product Overview IntroductionGeneral Specification Product SpecificationExpansive Interface Mechanical Drawing Block Diagram 1Connector Location Hardware SetupJumper Reference JP2 JP3External Connector Connector ReferenceCPU and Memory Setup CPU SetupMemory Setup Cmos Setup Enhanced IDE & CF Interface FDD Floppy PortAnalog VGA Interface Onboard Display InterfacePin Description Digital DisplayPin Assignment Preparing the LE-366,LCD panel and the backlight inverter LCD Installation GuidePanel Number Resolution USB2.0 Interface Gpio Interface Serial Port Jumper Setting Power and Fan Connector Power InputPower Output Fan Connector Indicator and Switch This Page is Left For Blank 1CMOS Setup Utility Main Screen Bios SetupThis Page is Left for Blank IDE Port Appendix a I/O Port Pin AssignmentSerial Port CRT Port LAN PortUSB Port PS/2 Keyboard & Mouse Port This Page is Left for Blank Appendix B Flash Bios Bios Auto Flash ToolFlash Method C1. I/O Port Address Map Appendix C System ResourcesLE-366 User’s Manual C2. Memory Address Map C3. System IRQ Resources GPIO0...GPIO7 Appendix D Programming GPIO’sProgram Sample Appendix E Watch Dog timer SettingThis Page is Left for Blank